INA148UA vs INA146UAG4 Comparaison
Comparaison détaillée côte à côte de INA148UA par Texas Instruments et INA146UAG4 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA146UAG4 - High-Voltage Programmable Gain Difference Amplifier | Texas Instruments
INA146UAG4 ✓ ActifComparaison des spécifications
| Paramètre | INA148UA | INA146UAG4 |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Precision unity-gain difference amplifier | High-Voltage Programmable Gain Difference Amplifier |
| Common-Mode Voltage Range | ±200 V | — |
| Differential Gain | 1 | — |
| Bandwidth | 100 kHz | — |
| Slew Rate | 1 V/µs | — |
| Input Offset Voltage | 5 mV | [DATA_NEEDED: input offset voltage] |
| Minimum Common-Mode Rejection Ratio | 70 dB | — |
| Minimum Supply Voltage | 2.7 V | — |
| Maximum Supply Voltage | 36 V | — |
| Minimum Operating Temperature | −55 °C | — |
| Maximum Operating Temperature | +125 °C | — |
| Amplifier Count | 1 | — |
| Internal Amplifier Implementation | Monolithic precision bipolar operational amplifier | — |
| Resistor Network | Thin-film resistor network | — |
| Boîtier | 8-pin SOIC | 8-SOIC, 0.154 inch body width, 3.90 mm width |
| Type de montage | Surface mount | — |
| Moisture Sensitivity Level | MSL 3, 168 hours | — |
| Statut RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Amplifier Type | — | Differential amplifier |
| Number of Circuits | — | 1 circuit |
| Gain-Bandwidth Product | — | 550 kHz |
| Supply Type | — | Single or dual supply; exact limits not stated in the verified listings |
| Input Type | — | Differential input |
| Common-Mode Range | — | Extends beyond both supply rails |
| Input Protection | — | High-voltage capability provides inherent input protection |
| Type de sortie | — | Single-ended output |
| Gain Configuration | — | Programmable gain using an external gain-setting resistor |
| Operating Frequency | — | 550 kHz gain-bandwidth product |
| Differential Input Voltage | — | [DATA_NEEDED: maximum differential input voltage] |
| Common-Mode Input Voltage | — | [DATA_NEEDED: absolute maximum common-mode input voltage] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection ratio] |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |