INA2126PA vs INA128PA Vergleich
Detaillierter Direktvergleich von INA2126PA von Texas Instruments und INA128PA von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
INA2126PA - Dual 36V Micropower Instrumentation Amplifier | Texas Instruments
INA2126PA ✓ AktivSpezifikationsvergleich
| Parameter | INA2126PA | INA128PA |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Dual precision instrumentation amplifier | Precision instrumentation amplifier |
| Number of Channels | 2 channels | — |
| Supply Voltage Range | ±1.35 V to ±18 V | — |
| Maximum Supply Voltage | 36 V | — |
| Ruhestrom | 175 μA per channel | 700 µA |
| Offset Voltage | 250 μV | — |
| Gain-Bandwidth Product | 200 kHz | — |
| Input Type | Differential input | — |
| Architecture | Two-op-amp instrumentation amplifier | Three-op-amp instrumentation amplifier |
| Gehäuse | 16-pin PDIP | 8-pin PDIP |
| Package Type | Through-hole PDIP | — |
| Montageart | Through-hole | Through-hole |
| Application Category | Precision differential-signal acquisition | — |
| Portable Operation | Supported by low quiescent current | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | — |
| Gain Set Resistance | [DATA_NEEDED: gain-set resistor requirements] | — |
| Number of Circuits | — | 1 circuit |
| Common-Mode Rejection Ratio | — | 130 dB |
| Minimum Common-Mode Rejection | — | 120 dB |
| Maximum Input Offset Voltage | — | 50 µV |
| Maximum Input Voltage Drift | — | 0.5 µV/°C |
| Maximum Input Bias Current | — | 5 nA |
| Input Protection | — | ±40 V |
| Supply Range | — | Up to ±18 V |
| Gain Range | — | 1 to 10,000 |
| Gain Setting | — | Single external resistor |
| Bandwidth at Gain 100 | — | 200 kHz |
| Green Product | — | Yes |
| Restricted Substances | — | No Sb/Br |
| Betriebstemperatur | — | -40°C to +85°C |