INA2126PA vs INA128PA Comparaison
Comparaison détaillée côte à côte de INA2126PA par Texas Instruments et INA128PA par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA2126PA - Dual 36V Micropower Instrumentation Amplifier | Texas Instruments
INA2126PA ✓ ActifComparaison des spécifications
| Paramètre | INA2126PA | INA128PA |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Dual precision instrumentation amplifier | Precision instrumentation amplifier |
| Number of Channels | 2 channels | — |
| Supply Voltage Range | ±1.35 V to ±18 V | — |
| Maximum Supply Voltage | 36 V | — |
| Courant de repos | 175 μA per channel | 700 µA |
| Offset Voltage | 250 μV | — |
| Gain-Bandwidth Product | 200 kHz | — |
| Input Type | Differential input | — |
| Architecture | Two-op-amp instrumentation amplifier | Three-op-amp instrumentation amplifier |
| Boîtier | 16-pin PDIP | 8-pin PDIP |
| Package Type | Through-hole PDIP | — |
| Type de montage | Through-hole | Through-hole |
| Application Category | Precision differential-signal acquisition | — |
| Portable Operation | Supported by low quiescent current | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Gain Set Resistance | [DATA_NEEDED: gain-set resistor requirements] | — |
| Number of Circuits | — | 1 circuit |
| Common-Mode Rejection Ratio | — | 130 dB |
| Minimum Common-Mode Rejection | — | 120 dB |
| Maximum Input Offset Voltage | — | 50 µV |
| Maximum Input Voltage Drift | — | 0.5 µV/°C |
| Maximum Input Bias Current | — | 5 nA |
| Input Protection | — | ±40 V |
| Supply Range | — | Up to ±18 V |
| Gain Range | — | 1 to 10,000 |
| Gain Setting | — | Single external resistor |
| Bandwidth at Gain 100 | — | 200 kHz |
| Green Product | — | Yes |
| Restricted Substances | — | No Sb/Br |
| Température de fonctionnement | — | -40°C to +85°C |