ISL83485IP vs ISL83485IBZ-T Vergleich

Detaillierter Direktvergleich von ISL83485IP von Renesas Electronics und ISL83485IBZ-T von Renesas Electronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

Renesas Electronics
ISL83485IP ISL83485IP - 3.3V 10Mbps Half-Duplex RS-485/RS-422 | Renesas

ISL83485IP - 3.3V 10Mbps Half-Duplex RS-485/RS-422 | Renesas

ISL83485IP ✓ Aktiv
Renesas Electronics
ISL83485IBZ-T ISL83485IBZ-T - 3.3V 10Mbps RS-485/422 Transceiver, 8-SOIC | Renesas

ISL83485IBZ-T - 3.3V 10Mbps RS-485/422 Transceiver, 8-SOIC | Renesas

ISL83485IBZ-T ⚠ Letzte Bestellmöglichkeit

Spezifikationsvergleich

Parameter ISL83485IP ISL83485IBZ-T
Marke Renesas Electronics Renesas Electronics
Kategorie Interface ICs Interface ICs
Lebenszyklusstatus Aktiv Letzte Kaufgelegenheit
Product Type RS-485/RS-422 transceiver —
Transceiver Configuration 1 driver / 1 receiver —
Duplex Mode Half duplex —
Versorgungsspannung 3.3 V 3.3 V
Maximum Data Rate 10 Mbps —
Supported Standards RS-485 and RS-422 —
Process Technology BiCMOS BiCMOS
Power Consumption Profile Low power —
Signal Type Balanced differential —
Gehäuse 8-pin PDIP 8-SOIC (IB) 3.9 mm
Montageart Through-hole Surface Mount
Driver Enable Control [DATA_NEEDED: driver enable logic polarity and pin assignment] —
Receiver Enable Control [DATA_NEEDED: receiver enable logic polarity and pin assignment] —
Betriebstemperaturbereich [DATA_NEEDED: operating temperature range] —
Maximum Supply Voltage [DATA_NEEDED: maximum supply voltage] —
Common-Mode Voltage Range [DATA_NEEDED: common-mode voltage range] —
Differential Input Sensitivity [DATA_NEEDED: differential receiver sensitivity] —
Maximum Driver Output Current [DATA_NEEDED: maximum driver output current] —
Versorgungsstrom [DATA_NEEDED: typical and maximum supply current] —
ESD Protection Rating [DATA_NEEDED: ESD protection rating] —
RoHS-Status [DATA_NEEDED: RoHS compliance status] ROHS3 Compliant
REACH Status [DATA_NEEDED: REACH compliance status] —
Funktion — Transceiver
Number of Drivers/Receivers — 1/1
Duplex — Half
Protocol — RS-422, RS-485
Datenrate — 10 Mbps
Supply Voltage Range — 3.0 V to 3.6 V
Receiver Input Impedance — 1/8 unit-load (up to 256 nodes)
Betriebstemperatur — -40C to +85C
MSL-Level — [DATA_NEEDED: MSL level]
Shutdown Pin — Yes
ESD Protection (HBM) — [DATA_NEEDED: ESD rating kV]

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern