ISO1450BDWR vs ADM2484EBRWZ Vergleich
Detaillierter Direktvergleich von ISO1450BDWR von Texas Instruments und ADM2484EBRWZ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
ISO1450BDWR - 50Mbps 5kVrms Isolated RS-485/RS-422 Transceiver | Texas Instruments
ISO1450BDWR ✓ Aktiv
Spezifikationsvergleich
| Parameter | ISO1450BDWR | ADM2484EBRWZ |
|---|---|---|
| Marke | Texas Instruments | Analog Devices |
| Kategorie | Interface ICs | RS-485/RS-422 |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,95 | $3,10 |
| Funktion | Isolated half-duplex RS-485 / RS-422 transceiver | — |
| Data Rate (max) | 50 Mbps | — |
| Isolation Voltage (rms) | 5 kVrms (reinforced) | — |
| Number of Drivers / Receivers | 1/1 | — |
| Duplex | Half | Half/Full |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis voltage] | — |
| Supply Voltage VCC1 (logic side) | 3 V to 5.5 V | — |
| Supply Voltage VCC2 (bus side) | Internally generated by isolated DC-DC | — |
| Bus Pin ESD (IEC 61000-4-2) | ±16 kV (air / contact, per datasheet) | — |
| Bus Pin ESD (HBM) | ±4 kV | — |
| IEC 61000-4-4 EFT Immunity | ±4 kV | — |
| Surge Immunity | [DATA_NEEDED: IEC 61000-4-5 surge rating] | — |
| Unit Load | 1/8 (up to 256 nodes on bus) | — |
| Common-Mode Range | Wide common-mode bus voltage range (per datasheet) | — |
| Thermisches Abschalten | Yes | — |
| Current Limiting | Yes | — |
| Low-Power Standby | Yes | — |
| Betriebstemperatur | -40C to +125C | -40°C to +85°C |
| Gehäuse | SOIC-16 wide-body (DW), 16 pins | 16-SOIC (0.295", 7.50mm Width) |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | 3 (per JEDEC J-STD-020) | — |
| RoHS-Status | Compliant | Compliant |
| Compliance Standards | TIA/EIA-485-A, TIA/EIA-422, IEC 61000-4-2, IEC 61000-4-4 | — |
| Type | — | Isolated RS-485/RS-422 Transceiver |
| Number of Channels | — | 3 |
| Isolation Voltage | — | 5000 Vrms |
| Datenrate | — | 500 kbps |
| CMTI | — | 25 kV/µs |
| ESD Protection | — | ±15 kV |
| Supply Voltage (Logic) | — | 3.3 V or 5 V |
| Supply Voltage (Bus) | — | 5 V |
| Number of Drivers/Receivers | — | 1/1 |
| Propagation Delay | — | [DATA_NEEDED: Propagation delay] |