ISO1450BDWR vs ADM2484EBRWZ 비교
다음의 상세 나란히 비교: ISO1450BDWR 제조: Texas Instruments 및 ADM2484EBRWZ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
ISO1450BDWR - 50Mbps 5kVrms Isolated RS-485/RS-422 Transceiver | Texas Instruments
ISO1450BDWR ✓ 활성
사양 비교
| 파라미터 | ISO1450BDWR | ADM2484EBRWZ |
|---|---|---|
| 브랜드 | Texas Instruments | Analog Devices |
| 카테고리 | Interface ICs | RS-485/RS-422 |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $2.95 | $3.10 |
| 기능 | Isolated half-duplex RS-485 / RS-422 transceiver | — |
| Data Rate (max) | 50 Mbps | — |
| Isolation Voltage (rms) | 5 kVrms (reinforced) | — |
| Number of Drivers / Receivers | 1/1 | — |
| Duplex | Half | Half/Full |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis voltage] | — |
| Supply Voltage VCC1 (logic side) | 3 V to 5.5 V | — |
| Supply Voltage VCC2 (bus side) | Internally generated by isolated DC-DC | — |
| Bus Pin ESD (IEC 61000-4-2) | ±16 kV (air / contact, per datasheet) | — |
| Bus Pin ESD (HBM) | ±4 kV | — |
| IEC 61000-4-4 EFT Immunity | ±4 kV | — |
| Surge Immunity | [DATA_NEEDED: IEC 61000-4-5 surge rating] | — |
| Unit Load | 1/8 (up to 256 nodes on bus) | — |
| Common-Mode Range | Wide common-mode bus voltage range (per datasheet) | — |
| 열 차단 | Yes | — |
| Current Limiting | Yes | — |
| Low-Power Standby | Yes | — |
| 동작 온도 | -40C to +125C | -40°C to +85°C |
| 패키지 | SOIC-16 wide-body (DW), 16 pins | 16-SOIC (0.295", 7.50mm Width) |
| 실장 유형 | Surface Mount | Surface Mount |
| MSL 레벨 | 3 (per JEDEC J-STD-020) | — |
| RoHS 상태 | Compliant | Compliant |
| Compliance Standards | TIA/EIA-485-A, TIA/EIA-422, IEC 61000-4-2, IEC 61000-4-4 | — |
| Type | — | Isolated RS-485/RS-422 Transceiver |
| Number of Channels | — | 3 |
| Isolation Voltage | — | 5000 Vrms |
| 데이터 속도 | — | 500 kbps |
| CMTI | — | 25 kV/µs |
| ESD Protection | — | ±15 kV |
| Supply Voltage (Logic) | — | 3.3 V or 5 V |
| Supply Voltage (Bus) | — | 5 V |
| Number of Drivers/Receivers | — | 1/1 |
| Propagation Delay | — | [DATA_NEEDED: Propagation delay] |