ISO1450BDWR vs THVD1450DRBR Vergleich
Detaillierter Direktvergleich von ISO1450BDWR von Texas Instruments und THVD1450DRBR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
ISO1450BDWR - 50Mbps 5kVrms Isolated RS-485/RS-422 Transceiver | Texas Instruments
ISO1450BDWR ✓ AktivTexas Instruments
THVD1450DRBR - 3.3-5V RS-485 Transceiver, ±18kV ESD, 50Mbps | TI
THVD1450DRBR ✓ AktivSpezifikationsvergleich
| Parameter | ISO1450BDWR | THVD1450DRBR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,95 | $1,25 |
| Funktion | Isolated half-duplex RS-485 / RS-422 transceiver | — |
| Data Rate (max) | 50 Mbps | — |
| Isolation Voltage (rms) | 5 kVrms (reinforced) | — |
| Number of Drivers / Receivers | 1/1 | — |
| Duplex | Half | — |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis voltage] | 30 mV |
| Supply Voltage VCC1 (logic side) | 3 V to 5.5 V | — |
| Supply Voltage VCC2 (bus side) | Internally generated by isolated DC-DC | — |
| Bus Pin ESD (IEC 61000-4-2) | ±16 kV (air / contact, per datasheet) | — |
| Bus Pin ESD (HBM) | ±4 kV | — |
| IEC 61000-4-4 EFT Immunity | ±4 kV | — |
| Surge Immunity | [DATA_NEEDED: IEC 61000-4-5 surge rating] | — |
| Unit Load | 1/8 (up to 256 nodes on bus) | 1 UL (32 nodes on bus) |
| Common-Mode Range | Wide common-mode bus voltage range (per datasheet) | -7 V to +12 V |
| Thermisches Abschalten | Yes | — |
| Current Limiting | Yes | — |
| Low-Power Standby | Yes | — |
| Betriebstemperatur | -40C to +125C | -40°C to +125°C |
| Gehäuse | SOIC-16 wide-body (DW), 16 pins | 8-VSON EP (DRB) 3x3 mm |
| Montageart | Surface Mount | Surface Mount, wettable flank |
| MSL-Level | 3 (per JEDEC J-STD-020) | — |
| RoHS-Status | Compliant | Compliant |
| Compliance Standards | TIA/EIA-485-A, TIA/EIA-422, IEC 61000-4-2, IEC 61000-4-4 | — |
| Product Type | — | RS-485/RS-422 Transceiver (half-duplex) |
| Number of Drivers/Receivers | — | 1/1 |
| Supply Voltage (VCC) | — | 3 V to 5.5 V |
| Maximum Data Rate | — | 50 Mbps |
| ESD Protection (Bus Pins) | — | ±18 kV IEC 61000-4-2 contact/air |
| EFT Immunity | — | ±4 kV IEC 61000-4-4 |
| Receiver Fail-Safe | — | Internal biasing (idle/short/open = logic high) |
| Moisture Sensitivity Level | — | MSL 1 |
| Duplex Mode | — | Half |