ISO1450BDWR vs THVD1450DRBR Сравнение
Подробное сравнение бок о бок ISO1450BDWR от Texas Instruments и THVD1450DRBR от Texas Instruments. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Texas Instruments
ISO1450BDWR - 50Mbps 5kVrms Isolated RS-485/RS-422 Transceiver | Texas Instruments
ISO1450BDWR ✓ АктивенTexas Instruments
THVD1450DRBR - 3.3-5V RS-485 Transceiver, ±18kV ESD, 50Mbps | TI
THVD1450DRBR ✓ АктивенСравнение характеристик
| Параметр | ISO1450BDWR | THVD1450DRBR |
|---|---|---|
| Бренд | Texas Instruments | Texas Instruments |
| Категория | Interface ICs | Interface ICs |
| Статус жизненного цикла | Активен | Активен |
| Наличие | In Stock | In Stock |
| Цена за единицу (USD) | $2,95 | $1,25 |
| Функция | Isolated half-duplex RS-485 / RS-422 transceiver | — |
| Data Rate (max) | 50 Mbps | — |
| Isolation Voltage (rms) | 5 kVrms (reinforced) | — |
| Number of Drivers / Receivers | 1/1 | — |
| Duplex | Half | — |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis voltage] | 30 mV |
| Supply Voltage VCC1 (logic side) | 3 V to 5.5 V | — |
| Supply Voltage VCC2 (bus side) | Internally generated by isolated DC-DC | — |
| Bus Pin ESD (IEC 61000-4-2) | ±16 kV (air / contact, per datasheet) | — |
| Bus Pin ESD (HBM) | ±4 kV | — |
| IEC 61000-4-4 EFT Immunity | ±4 kV | — |
| Surge Immunity | [DATA_NEEDED: IEC 61000-4-5 surge rating] | — |
| Unit Load | 1/8 (up to 256 nodes on bus) | 1 UL (32 nodes on bus) |
| Common-Mode Range | Wide common-mode bus voltage range (per datasheet) | -7 V to +12 V |
| Тепловая защита | Yes | — |
| Current Limiting | Yes | — |
| Low-Power Standby | Yes | — |
| Рабочая температура | -40C to +125C | -40°C to +125°C |
| Корпус | SOIC-16 wide-body (DW), 16 pins | 8-VSON EP (DRB) 3x3 mm |
| Тип монтажа | Surface Mount | Surface Mount, wettable flank |
| Уровень MSL | 3 (per JEDEC J-STD-020) | — |
| Статус RoHS | Compliant | Compliant |
| Compliance Standards | TIA/EIA-485-A, TIA/EIA-422, IEC 61000-4-2, IEC 61000-4-4 | — |
| Product Type | — | RS-485/RS-422 Transceiver (half-duplex) |
| Number of Drivers/Receivers | — | 1/1 |
| Supply Voltage (VCC) | — | 3 V to 5.5 V |
| Maximum Data Rate | — | 50 Mbps |
| ESD Protection (Bus Pins) | — | ±18 kV IEC 61000-4-2 contact/air |
| EFT Immunity | — | ±4 kV IEC 61000-4-4 |
| Receiver Fail-Safe | — | Internal biasing (idle/short/open = logic high) |
| Moisture Sensitivity Level | — | MSL 1 |
| Duplex Mode | — | Half |