ITS4200SMEOHUMA1 vs BTS70401EPAXUMA1 Vergleich
Detaillierter Direktvergleich von ITS4200SMEOHUMA1 von Infineon und BTS70401EPAXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | ITS4200SMEOHUMA1 | BTS70401EPAXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,98 | $1,05 |
| Part Status | Active | — |
| Funktion | High-Side Switch | — |
| Topologie | 1:1 N-Channel | — |
| Ausgangskonfiguration | High Side | — |
| Anzahl der Ausgänge | 1 | — |
| Maximaler Ausgangsstrom | 700 mA | — |
| On-State Resistance (Typ) | 150 mOhm | — |
| Betriebsversorgungsspannung | 5 V to 45 V nominal (load-dump tolerant) | — |
| Input Type | CMOS-compatible, current-controlled | — |
| Fault Protection | Current Limiting (Fixed), Over-Temperature, Over-Voltage, Short Circuit, Ground Loss | — |
| Operating Temperature (TJ) | -40C to +125C | — |
| Montageart | Surface Mount | Surface Mount |
| Supplier Device Package | PG-SOT223-4 (3 leads + tab) | — |
| Automotive Qualification | Not qualified for automotive / transportation applications (Industrial grade) | — |
| RoHS-Status | Compliant | Compliant |
| Product Type | — | Smart High-Side Power Switch |
| Technology Family | — | PROFET+2 (SMART7) |
| Number of Channels | — | 1 |
| Typical On-Resistance (RDSon) | — | 0.019 Ohm |
| Nominal Load Current | — | 4.5 A |
| Load Voltage Range | — | 3.5 V to 28 V (12 V nominal) |
| Operating Supply Voltage (VS) | — | 3.5 V to 28 V |
| Input Logic Level | — | CMOS 3.3 V / 5 V compatible |
| Reverse Battery Protection | — | ReverSave (integrated) |
| Current Sense Output (IS) | — | Yes (analog) |
| Diagnostic Feedback | — | Fault flag + analog IS pin |
| AEC-Q100 Qualification | — | Grade 1 (-40 C to +125 C) |
| Functional Safety | — | ISO 26262-ready |
| Gehäuse | — | PG-TSDSO-14-22 (14-pin, exposed pad) |