ITS4200SMEOHUMA1 vs BTS70401EPAXUMA1 Comparación
Comparación detallada lado a lado de ITS4200SMEOHUMA1 por Infineon y BTS70401EPAXUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | ITS4200SMEOHUMA1 | BTS70401EPAXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,98 | $1,05 |
| Part Status | Active | — |
| Función | High-Side Switch | — |
| Topología | 1:1 N-Channel | — |
| Configuración de salida | High Side | — |
| Número de salidas | 1 | — |
| Corriente de salida máxima | 700 mA | — |
| On-State Resistance (Typ) | 150 mOhm | — |
| Tensión de alimentación de funcionamiento | 5 V to 45 V nominal (load-dump tolerant) | — |
| Input Type | CMOS-compatible, current-controlled | — |
| Fault Protection | Current Limiting (Fixed), Over-Temperature, Over-Voltage, Short Circuit, Ground Loss | — |
| Operating Temperature (TJ) | -40C to +125C | — |
| Tipo de montaje | Surface Mount | Surface Mount |
| Supplier Device Package | PG-SOT223-4 (3 leads + tab) | — |
| Automotive Qualification | Not qualified for automotive / transportation applications (Industrial grade) | — |
| Estado RoHS | Compliant | Compliant |
| Product Type | — | Smart High-Side Power Switch |
| Technology Family | — | PROFET+2 (SMART7) |
| Number of Channels | — | 1 |
| Typical On-Resistance (RDSon) | — | 0.019 Ohm |
| Nominal Load Current | — | 4.5 A |
| Load Voltage Range | — | 3.5 V to 28 V (12 V nominal) |
| Operating Supply Voltage (VS) | — | 3.5 V to 28 V |
| Input Logic Level | — | CMOS 3.3 V / 5 V compatible |
| Reverse Battery Protection | — | ReverSave (integrated) |
| Current Sense Output (IS) | — | Yes (analog) |
| Diagnostic Feedback | — | Fault flag + analog IS pin |
| AEC-Q100 Qualification | — | Grade 1 (-40 C to +125 C) |
| Functional Safety | — | ISO 26262-ready |
| Encapsulado | — | PG-TSDSO-14-22 (14-pin, exposed pad) |