ITS428L2ATMA1 vs ITS4140NHUMA1 Vergleich
Detaillierter Direktvergleich von ITS428L2ATMA1 von Infineon und ITS4140NHUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | ITS428L2ATMA1 | ITS4140NHUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,85 | $0,72 |
| Product Type | Smart High-Side Power Switch | — |
| Family | PROFET Industrial | — |
| Anzahl der Ausgänge | 1 | — |
| Ausgangskonfiguration | High-Side | — |
| Switch Type | N-Channel vertical power MOSFET | N-Channel (vertical, integrated) |
| Continuous Load Current | 5.8 A | — |
| Supply Voltage Range | 5 V to 24 V DC (load-dump tolerant via external resistor) | — |
| Input Logic Compatibility | CMOS, ground-referenced | — |
| On-Resistance (typ) | [DATA_NEEDED: RDS(on) at 25 C] | — |
| Diagnostic Feedback | Yes (open-load, short, overtemperature) | — |
| Overvoltage / Load-Dump Protection | Yes (external resistor required) | — |
| Protection Functions | Overload, short-circuit, overvoltage, overtemperature | — |
| Betriebstemperatur | [DATA_NEEDED: operating junction range] | — |
| Gehäuse | PG-TO252-5-11 (TO-252-5 / DPAK, 4 leads + tab) | PG-SOT223-4 (3+Tab) |
| Montageart | Surface Mount | Surface Mount |
| Technology | Smart SIPMOS | — |
| RoHS-Status | Compliant | Compliant |
| Funktion | — | High-Side Power Switch / Load Driver |
| Topologie | — | 1:1 (Input to Output) |
| Output Current (Continuous) | — | 200 mA |
| Supply Voltage Range (Vbb) | — | 4.9 V to 60 V |
| Load Dump Withstand | — | [DATA_NEEDED: load-dump transient rating per ISO 7637] |
| On-Resistance (RDS(on)) | — | [DATA_NEEDED: typical RDS(on) in ohms] |
| Short-Circuit Protection | — | Yes (current limit + thermal shutdown) |
| Overload Protection | — | Yes |
| Overvoltage Protection | — | Yes (including load dump) |
| Inductive Load Clamping | — | Yes (active negative-voltage clamp at output) |
| Diagnostic Output | — | Yes (status/IN pin feedback) |
| Betriebstemperaturbereich | — | -40 C to +125 C |
| MSL-Level | — | 1 (per JEDEC J-STD-020) |
| Automotive Qualified | — | [DATA_NEEDED: AEC-Q100 grade] |