ITS428L2ATMA1 vs ITS4140NHUMA1 Comparaison
Comparaison détaillée côte à côte de ITS428L2ATMA1 par Infineon et ITS4140NHUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | ITS428L2ATMA1 | ITS4140NHUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,85 | $0,72 |
| Product Type | Smart High-Side Power Switch | — |
| Family | PROFET Industrial | — |
| Nombre de sorties | 1 | — |
| Configuration de sortie | High-Side | — |
| Switch Type | N-Channel vertical power MOSFET | N-Channel (vertical, integrated) |
| Continuous Load Current | 5.8 A | — |
| Supply Voltage Range | 5 V to 24 V DC (load-dump tolerant via external resistor) | — |
| Input Logic Compatibility | CMOS, ground-referenced | — |
| On-Resistance (typ) | [DATA_NEEDED: RDS(on) at 25 C] | — |
| Diagnostic Feedback | Yes (open-load, short, overtemperature) | — |
| Overvoltage / Load-Dump Protection | Yes (external resistor required) | — |
| Protection Functions | Overload, short-circuit, overvoltage, overtemperature | — |
| Température de fonctionnement | [DATA_NEEDED: operating junction range] | — |
| Boîtier | PG-TO252-5-11 (TO-252-5 / DPAK, 4 leads + tab) | PG-SOT223-4 (3+Tab) |
| Type de montage | Surface Mount | Surface Mount |
| Technology | Smart SIPMOS | — |
| Statut RoHS | Compliant | Compliant |
| Fonction | — | High-Side Power Switch / Load Driver |
| Topologie | — | 1:1 (Input to Output) |
| Output Current (Continuous) | — | 200 mA |
| Supply Voltage Range (Vbb) | — | 4.9 V to 60 V |
| Load Dump Withstand | — | [DATA_NEEDED: load-dump transient rating per ISO 7637] |
| On-Resistance (RDS(on)) | — | [DATA_NEEDED: typical RDS(on) in ohms] |
| Short-Circuit Protection | — | Yes (current limit + thermal shutdown) |
| Overload Protection | — | Yes |
| Overvoltage Protection | — | Yes (including load dump) |
| Inductive Load Clamping | — | Yes (active negative-voltage clamp at output) |
| Diagnostic Output | — | Yes (status/IN pin feedback) |
| Plage de température de fonctionnement | — | -40 C to +125 C |
| Niveau MSL | — | 1 (per JEDEC J-STD-020) |
| Automotive Qualified | — | [DATA_NEEDED: AEC-Q100 grade] |