ITS716GFUMA1 vs BTS3046SDRATMA1 Vergleich
Detaillierter Direktvergleich von ITS716GFUMA1 von Infineon und BTS3046SDRATMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | ITS716GFUMA1 | BTS3046SDRATMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $3,22 | $0,74 |
| Product Type | Smart High-Side Power Switch | Smart Low-Side Power Switch (HITFET family) |
| Number of Channels | 4 | — |
| Ausgangskonfiguration | High-side (N-Channel MOSFET) | — |
| Continuous Current per Channel | 2.3 A | — |
| On-State Resistance (RON) per Channel | [DATA_NEEDED: Ron typical value] | — |
| Operating Voltage Range (Vbb) | 5 V to 36 V | 4.5 V to 42 V |
| Load Dump Tolerance | Up to 45 V | — |
| Standby Current | [DATA_NEEDED: Iq standby typical] | — |
| Input Logic Levels | CMOS/TTL compatible, parallel interface | — |
| Diagnostic Output | Open-drain fault flag, one per channel | — |
| Protection Features | Overload, short-circuit, over-temperature, over-voltage, ESD | Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD |
| PWM Capability | Up to 1 kHz | — |
| Betriebstemperaturbereich | -40 C to +85 C (industrial grade) | -40 C to +150 C |
| Gehäuse | PG-DSO-20-32 (20-pin SOIC, exposed pad) | PG-TO252-3-11 (DPAK, 3-pin with tab) |
| Wärmewiderstand, Sperrschicht-Umgebung | [DATA_NEEDED: theta_JA value] | — |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | [DATA_NEEDED: MSL rating] | — |
| RoHS-Status | Compliant | — |
| Manufacturer | — | Infineon Technologies |
| Switch Configuration | — | 1:1 N-Channel, single channel |
| Continuous Output Current | — | 3.6 A |
| On-State Resistance (Rds(on)) | — | 95 mOhm (0.095 ohm) typical |
| Load Type | — | Low-side switch (ground-referenced load) |
| Input Logic | — | CMOS-compatible with internal pull-down |
| Status Feedback | — | Yes (status output pin) |
| Automotive Qualification | — | AEC-Q100 (where variant specified) |
| RoHS / Lead-Free | — | Compliant / Yes |