ITS716GFUMA1 vs BTS3046SDRATMA1 Comparación
Comparación detallada lado a lado de ITS716GFUMA1 por Infineon y BTS3046SDRATMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | ITS716GFUMA1 | BTS3046SDRATMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $3,22 | $0,74 |
| Product Type | Smart High-Side Power Switch | Smart Low-Side Power Switch (HITFET family) |
| Number of Channels | 4 | — |
| Configuración de salida | High-side (N-Channel MOSFET) | — |
| Continuous Current per Channel | 2.3 A | — |
| On-State Resistance (RON) per Channel | [DATA_NEEDED: Ron typical value] | — |
| Operating Voltage Range (Vbb) | 5 V to 36 V | 4.5 V to 42 V |
| Load Dump Tolerance | Up to 45 V | — |
| Standby Current | [DATA_NEEDED: Iq standby typical] | — |
| Input Logic Levels | CMOS/TTL compatible, parallel interface | — |
| Diagnostic Output | Open-drain fault flag, one per channel | — |
| Protection Features | Overload, short-circuit, over-temperature, over-voltage, ESD | Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD |
| PWM Capability | Up to 1 kHz | — |
| Rango de temperatura de funcionamiento | -40 C to +85 C (industrial grade) | -40 C to +150 C |
| Encapsulado | PG-DSO-20-32 (20-pin SOIC, exposed pad) | PG-TO252-3-11 (DPAK, 3-pin with tab) |
| Resistencia térmica, unión a ambiente | [DATA_NEEDED: theta_JA value] | — |
| Tipo de montaje | Surface Mount | Surface Mount |
| Nivel MSL | [DATA_NEEDED: MSL rating] | — |
| Estado RoHS | Compliant | — |
| Manufacturer | — | Infineon Technologies |
| Switch Configuration | — | 1:1 N-Channel, single channel |
| Continuous Output Current | — | 3.6 A |
| On-State Resistance (Rds(on)) | — | 95 mOhm (0.095 ohm) typical |
| Load Type | — | Low-side switch (ground-referenced load) |
| Input Logic | — | CMOS-compatible with internal pull-down |
| Status Feedback | — | Yes (status output pin) |
| Automotive Qualification | — | AEC-Q100 (where variant specified) |
| RoHS / Lead-Free | — | Compliant / Yes |