KSZ8041TLI vs KSZ8041TL Vergleich
Detaillierter Direktvergleich von KSZ8041TLI von Microchip Technology und KSZ8041TL von Microchip Technology. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | KSZ8041TLI | KSZ8041TL |
|---|---|---|
| Marke | Microchip Technology | Microchip Technology |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Device Type | 10Base-T/100Base-TX Ethernet physical-layer transceiver | Ethernet interface IC / physical-layer transceiver |
| Supported Data Rates | 10 Mbps and 100 Mbps | 10 Mb/s and 100 Mb/s |
| Channel Count | 1 channel | — |
| Host Interfaces | MII, RMII, and SMII | MII, RMII, and SMII |
| Supply Type | Single supply | — |
| Typical Operating Supply Voltage | 3.3 V | — |
| Operating Voltage Range | 3.135 V to 3.465 V | — |
| Ethernet Standards | IEEE 802.3 and IEEE 802.3u | — |
| Auto-Negotiation | Enabled by hardware pin strapping on pin 42 or software through register 0h bit 12 | — |
| Auto-Negotiation Standard | Clause 28 of the IEEE 802.3u specification | — |
| Package Type | 48-pin TQFP | — |
| Package Dimensions | 7 mm x 7 mm | — |
| Montageart | Surface mount | Surface mount |
| Pin-Anzahl | 48 pins | — |
| RoHS-Status | [DATA_NEEDED: verified RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: verified REACH status] | [DATA_NEEDED: REACH status] |
| Betriebstemperaturbereich | [DATA_NEEDED: verified operating temperature range] | — |
| MDI/MDIX Support | HP Auto MDI/MDIX | — |
| Product Type | — | 10BASE-T/100BASE-TX Ethernet physical-layer transceiver |
| Supply Architecture | — | Single-supply |
| Cable Standard | — | 10BASE-T and 100BASE-TX |
| Mixed-Signal Design | — | Yes; intended to extend signaling distance while reducing power consumption |
| Auto MDI/MDIX | — | HP Auto MDI/MDIX |
| Interrupt Signal | — | INTRP on pin 32; optional PHY-register status-update signal |
| Number of Drivers/Receivers | — | 1 driver and 1 receiver |
| Gehäuse | — | 48-TQFP (7 x 7 mm) |
| Betriebstemperatur | — | [DATA_NEEDED: operating temperature range] |
| Versorgungsspannung | — | [DATA_NEEDED: supply voltage range] |
| Interface Clock | — | [DATA_NEEDED: clock frequency] |
| Ethernet Magnetics | — | [DATA_NEEDED: supported magnetics and isolation configuration] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |