KSZ8041TLI vs KSZ8041TL Сравнение
Подробное сравнение бок о бок KSZ8041TLI от Microchip Technology и KSZ8041TL от Microchip Technology. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Сравнение характеристик
| Параметр | KSZ8041TLI | KSZ8041TL |
|---|---|---|
| Бренд | Microchip Technology | Microchip Technology |
| Категория | Interface ICs | Interface ICs |
| Статус жизненного цикла | Активен | Активен |
| Device Type | 10Base-T/100Base-TX Ethernet physical-layer transceiver | Ethernet interface IC / physical-layer transceiver |
| Supported Data Rates | 10 Mbps and 100 Mbps | 10 Mb/s and 100 Mb/s |
| Channel Count | 1 channel | — |
| Host Interfaces | MII, RMII, and SMII | MII, RMII, and SMII |
| Supply Type | Single supply | — |
| Typical Operating Supply Voltage | 3.3 V | — |
| Operating Voltage Range | 3.135 V to 3.465 V | — |
| Ethernet Standards | IEEE 802.3 and IEEE 802.3u | — |
| Auto-Negotiation | Enabled by hardware pin strapping on pin 42 or software through register 0h bit 12 | — |
| Auto-Negotiation Standard | Clause 28 of the IEEE 802.3u specification | — |
| Package Type | 48-pin TQFP | — |
| Package Dimensions | 7 mm x 7 mm | — |
| Тип монтажа | Surface mount | Surface mount |
| Число выводов | 48 pins | — |
| Статус RoHS | [DATA_NEEDED: verified RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: verified REACH status] | [DATA_NEEDED: REACH status] |
| Диапазон рабочих температур | [DATA_NEEDED: verified operating temperature range] | — |
| MDI/MDIX Support | HP Auto MDI/MDIX | — |
| Product Type | — | 10BASE-T/100BASE-TX Ethernet physical-layer transceiver |
| Supply Architecture | — | Single-supply |
| Cable Standard | — | 10BASE-T and 100BASE-TX |
| Mixed-Signal Design | — | Yes; intended to extend signaling distance while reducing power consumption |
| Auto MDI/MDIX | — | HP Auto MDI/MDIX |
| Interrupt Signal | — | INTRP on pin 32; optional PHY-register status-update signal |
| Number of Drivers/Receivers | — | 1 driver and 1 receiver |
| Корпус | — | 48-TQFP (7 x 7 mm) |
| Рабочая температура | — | [DATA_NEEDED: operating temperature range] |
| Напряжение питания | — | [DATA_NEEDED: supply voltage range] |
| Interface Clock | — | [DATA_NEEDED: clock frequency] |
| Ethernet Magnetics | — | [DATA_NEEDED: supported magnetics and isolation configuration] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |