KSZ8895MQXI vs KSZ8895FQXI Vergleich
Detaillierter Direktvergleich von KSZ8895MQXI von Microchip Technology und KSZ8895FQXI von Microchip Technology. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Microchip Technology
KSZ8895MQXI - 5-Port 10/100 Managed Ethernet Switch | Microchip
KSZ8895MQXI ✓ AktivMicrochip Technology
KSZ8895FQXI - 5-Port 10/100 Managed Ethernet Switch | Microchip Technology
KSZ8895FQXI ✓ AktivSpezifikationsvergleich
| Parameter | KSZ8895MQXI | KSZ8895FQXI |
|---|---|---|
| Marke | Microchip Technology | Microchip Technology |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Ethernet Switch IC | Managed Layer 2 Ethernet switch |
| Number of Ports | 5 (10/100Base-TX) | — |
| Switch Fabric Bandwidth | 1.4 Gbps non-blocking | — |
| PHY Standard | IEEE 802.3u 100Base-TX / IEEE 802.3 10Base-T | — |
| Host Interface | MII / RMII | MII and RMII |
| Management Interface | I2C / SPI | — |
| Auto-MDI/MDIX | Yes (HP Auto-MDIX on all ports) | — |
| MAC Address Table | 4K entries | — |
| Frame Buffer | 64 KB | — |
| VLAN Support | IEEE 802.1Q, 16 VLAN groups | — |
| QoS Support | IEEE 802.1p, 4 priority queues | — |
| Versorgungsspannung | 3.3 V (single supply, internal 1.8 V LDO) | — |
| Betriebstemperatur | -40C to +85C (industrial grade) | — |
| Gehäuse | 128-pin PQFP (14x20 mm) | 128-pin PQFP, 14 mm x 20 mm |
| Montageart | Surface Mount | Surface mount |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS compliance status] |
| AEC-Q100 | Qualified (automotive grade) | — |
| Number of Ethernet Ports | — | 5 ports |
| Supported Ethernet Speeds | — | 10 Mb/s and 100 Mb/s |
| Integrated PHY Configuration | — | 5 integrated 10BASE-T/100BASE-TX PHYs |
| Operating Voltage | — | 3.3 V |
| Network Layer | — | Layer 2 |
| Automotive Qualification | — | Automotive qualified |
| 10BASE-T Driver Integration | — | 10BASE-T driver incorporated into the 100BASE-T driver |
| 10BASE-T Output Amplitude | — | 2.3 V typical |
| Output Wave Shaping | — | Internally wave-shaped |
| Output Pre-emphasis | — | Internally pre-emphasized |
| RJ45 Transmit Channel Termination | — | 75 ohm in series with a 1000 pF, 2 kV capacitor to chassis ground |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |
| Betriebstemperaturbereich | — | [DATA_NEEDED: operating temperature range] |
| Maximum Total Port Current | — | [DATA_NEEDED: maximum total port current] |
| Typical Transceiver Current | — | [DATA_NEEDED: typical transceiver current] |
| Junction Temperature | — | [DATA_NEEDED: maximum junction temperature] |