KSZ8895MQXI vs KSZ8895FQXI Comparaison
Comparaison détaillée côte à côte de KSZ8895MQXI par Microchip Technology et KSZ8895FQXI par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
KSZ8895MQXI - 5-Port 10/100 Managed Ethernet Switch | Microchip
KSZ8895MQXI ✓ ActifMicrochip Technology
KSZ8895FQXI - 5-Port 10/100 Managed Ethernet Switch | Microchip Technology
KSZ8895FQXI ✓ ActifComparaison des spécifications
| Paramètre | KSZ8895MQXI | KSZ8895FQXI |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Ethernet Switch IC | Managed Layer 2 Ethernet switch |
| Number of Ports | 5 (10/100Base-TX) | — |
| Switch Fabric Bandwidth | 1.4 Gbps non-blocking | — |
| PHY Standard | IEEE 802.3u 100Base-TX / IEEE 802.3 10Base-T | — |
| Host Interface | MII / RMII | MII and RMII |
| Management Interface | I2C / SPI | — |
| Auto-MDI/MDIX | Yes (HP Auto-MDIX on all ports) | — |
| MAC Address Table | 4K entries | — |
| Frame Buffer | 64 KB | — |
| VLAN Support | IEEE 802.1Q, 16 VLAN groups | — |
| QoS Support | IEEE 802.1p, 4 priority queues | — |
| Tension d'alimentation | 3.3 V (single supply, internal 1.8 V LDO) | — |
| Température de fonctionnement | -40C to +85C (industrial grade) | — |
| Boîtier | 128-pin PQFP (14x20 mm) | 128-pin PQFP, 14 mm x 20 mm |
| Type de montage | Surface Mount | Surface mount |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS compliance status] |
| AEC-Q100 | Qualified (automotive grade) | — |
| Number of Ethernet Ports | — | 5 ports |
| Supported Ethernet Speeds | — | 10 Mb/s and 100 Mb/s |
| Integrated PHY Configuration | — | 5 integrated 10BASE-T/100BASE-TX PHYs |
| Operating Voltage | — | 3.3 V |
| Network Layer | — | Layer 2 |
| Automotive Qualification | — | Automotive qualified |
| 10BASE-T Driver Integration | — | 10BASE-T driver incorporated into the 100BASE-T driver |
| 10BASE-T Output Amplitude | — | 2.3 V typical |
| Output Wave Shaping | — | Internally wave-shaped |
| Output Pre-emphasis | — | Internally pre-emphasized |
| RJ45 Transmit Channel Termination | — | 75 ohm in series with a 1000 pF, 2 kV capacitor to chassis ground |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Maximum Total Port Current | — | [DATA_NEEDED: maximum total port current] |
| Typical Transceiver Current | — | [DATA_NEEDED: typical transceiver current] |
| Junction Temperature | — | [DATA_NEEDED: maximum junction temperature] |