KSZ9031RNXVB-VAO vs KSZ9031RNXCC Vergleich
Detaillierter Direktvergleich von KSZ9031RNXVB-VAO von Microchip Technology und KSZ9031RNXCC von Microchip Technology. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Microchip Technology
KSZ9031RNXVB-VAO - Gigabit Ethernet RGMII Transceiver AEC-Q100 | Microchip
KSZ9031RNXVB-VAO ✓ AktivSpezifikationsvergleich
| Parameter | KSZ9031RNXVB-VAO | KSZ9031RNXCC |
|---|---|---|
| Marke | Microchip Technology | Microchip Technology |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $5,65 | $4,05 |
| Product Type | Ethernet Transceiver (PHY) | Ethernet Physical Layer Transceiver (PHY) |
| Datenrate | 10/100/1000 Mbps | 10 / 100 / 1000 Mbps (triple-speed) |
| Standards Compliance | IEEE 802.3 10BASE-T, 100BASE-TX, 1000BASE-T | — |
| MAC-Side Interface | RGMII (Version 2.0 compliant, on-chip delay) | — |
| Versorgungsspannung | 3.3 V (single supply; internal LDO for core) | — |
| MAC I/O Voltage Tolerance | 3.3 V / 2.5 V / 1.8 V | — |
| Gehäuse | 48-pin WQFN (wettable-flank) | 48-pin QFN (7x7 mm) |
| Betriebstemperatur | -40C to +105C (AEC-Q100 Grade 2) | 0C to +70C (commercial grade, CC suffix) |
| Automotive Qualification | AEC-Q100 qualified (VAO suffix) | — |
| Energy-Efficient Ethernet | IEEE 802.3az supported | — |
| Auto-Negotiation | Yes (with HP Auto-MDIX) | — |
| Wake-on-LAN | Supported | — |
| Loopback Modes | Remote and local loopback | — |
| Reference Clock | 25 MHz crystal or 125 MHz LVCMOS reference | — |
| Typical Active Power | 450 mW at 1 Gbps | — |
| Montageart | Surface Mount | Surface Mount |
| Lead-Free / RoHS | Yes (lead-free) | — |
| MSL-Level | [DATA_NEEDED: MSL rating] | 3 |
| Standards | — | IEEE 802.3, 802.3u, 802.3ab, 802.3az (EEE) |
| MAC Interface | — | RGMII (Version 2.0 compliant, on-chip delay) |
| Cable Interface | — | 4 differential pairs, CAT-5 UTP, 100-ohm differential |
| Management Interface | — | MDIO / MDC (IEEE 802.3 clause 22/45) |
| Supply Voltage (Analog/DVDD) | — | 3.3 V |
| Core Supply | — | 1.2 V (on-chip LDO controller + external MOSFET) |
| On-chip Features | — | Termination resistors, LinkMD cable diagnostics, auto-negotiation, polarity correction |
| Power Saving | — | Energy Efficient Ethernet (EEE) IEEE 802.3az, Wake-on-LAN, hardware CPD mode |
| RoHS-Status | — | Compliant |