KSZ9131RNXI vs KSZ9131RNXC Vergleich
Detaillierter Direktvergleich von KSZ9131RNXI von Microchip Technology und KSZ9131RNXC von Microchip Technology. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Microchip Technology
KSZ9131RNXC - Gigabit Ethernet PHY Transceiver, RGMII, QFN-48 (Tape & Reel)
KSZ9131RNXC ✓ AktivSpezifikationsvergleich
| Parameter | KSZ9131RNXI | KSZ9131RNXC |
|---|---|---|
| Marke | Microchip Technology | Microchip Technology |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Ethernet Data Rate | 10/100/1000 Mbps | — |
| Duplex Support | Half-duplex and full-duplex | — |
| Ethernet Compliance | IEEE 802.3 compliant | — |
| Host Interface | GMII/MII/RGMII | — |
| I/O Voltage Tolerance | 3.3 V, 2.5 V, and 1.8 V | — |
| Primary Supply | 3.3 V | — |
| Reference Clock Output | 125 MHz | — |
| RGMII Clock Frequency | 125 MHz | — |
| RGMII Clock Period | 8 ns | — |
| Differential Pair Termination | On-chip resistors | — |
| Power Architecture | Single 3.3 V operation with one external FET | — |
| Auto-Negotiation | 10/100/1000 Mbps and half/full duplex | Yes (IEEE 802.3 Clause 28) |
| LED Functions | Programmable link, activity, and speed outputs | — |
| Low-Power Mode | Energy-detect power-down | — |
| Wake-on-LAN | Supported with custom-packet detection | Supported |
| Cable Diagnostic | LinkMD TDR-based diagnostic | — |
| Baseline Wander | Correction supported | — |
| Gehäuse | 48-QFN (7 x 7 mm) | 48-pin QFN (7x7 mm) |
| Montageart | Surface mount | Surface Mount |
| Betriebstemperatur | [DATA_NEEDED: operating temperature range] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| Product Type | — | Ethernet PHY Transceiver |
| Datenrate | — | 10/100/1000 Mbps (Triple-Speed) |
| Standards | — | IEEE 802.3, 802.3u, 802.3ab, 802.3az |
| MAC Interface | — | RGMII / GMII / MII |
| Media Interface | — | Twisted Pair (CAT-5/5e/6 UTP) |
| Versorgungsspannung | — | 3.3 V (single supply, internal 1.2 V LDO) |
| Typical Power Consumption | — | 600 mW (1000Base-T link) |
| Betriebstemperaturbereich | — | -40 C to +85 C (industrial) |
| Auto-MDI/MDIX | — | Yes (HP Auto-MDIX, all speeds) |
| Energy Efficient Ethernet | — | Yes (IEEE 802.3az) |
| Cable Diagnostics | — | LinkMD cable fault detection |
| Number of Transceivers | — | 1 |
| AEC-Q100 Qualification | — | Yes (automotive grade) |
| RoHS-Status | — | Compliant |