KSZ9131RNXI vs KSZ9131RNXC Comparação
Comparação detalhada lado a lado de KSZ9131RNXI por Microchip Technology e KSZ9131RNXC por Microchip Technology. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Microchip Technology
KSZ9131RNXC - Gigabit Ethernet PHY Transceiver, RGMII, QFN-48 (Tape & Reel)
KSZ9131RNXC ✓ AtivoComparação de especificações
| Parâmetro | KSZ9131RNXI | KSZ9131RNXC |
|---|---|---|
| Marca | Microchip Technology | Microchip Technology |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Ethernet Data Rate | 10/100/1000 Mbps | — |
| Duplex Support | Half-duplex and full-duplex | — |
| Ethernet Compliance | IEEE 802.3 compliant | — |
| Host Interface | GMII/MII/RGMII | — |
| I/O Voltage Tolerance | 3.3 V, 2.5 V, and 1.8 V | — |
| Primary Supply | 3.3 V | — |
| Reference Clock Output | 125 MHz | — |
| RGMII Clock Frequency | 125 MHz | — |
| RGMII Clock Period | 8 ns | — |
| Differential Pair Termination | On-chip resistors | — |
| Power Architecture | Single 3.3 V operation with one external FET | — |
| Auto-Negotiation | 10/100/1000 Mbps and half/full duplex | Yes (IEEE 802.3 Clause 28) |
| LED Functions | Programmable link, activity, and speed outputs | — |
| Low-Power Mode | Energy-detect power-down | — |
| Wake-on-LAN | Supported with custom-packet detection | Supported |
| Cable Diagnostic | LinkMD TDR-based diagnostic | — |
| Baseline Wander | Correction supported | — |
| Encapsulamento | 48-QFN (7 x 7 mm) | 48-pin QFN (7x7 mm) |
| Tipo de montagem | Surface mount | Surface Mount |
| Temperatura de operação | [DATA_NEEDED: operating temperature range] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| Product Type | — | Ethernet PHY Transceiver |
| Taxa de dados | — | 10/100/1000 Mbps (Triple-Speed) |
| Standards | — | IEEE 802.3, 802.3u, 802.3ab, 802.3az |
| MAC Interface | — | RGMII / GMII / MII |
| Media Interface | — | Twisted Pair (CAT-5/5e/6 UTP) |
| Tensão de alimentação | — | 3.3 V (single supply, internal 1.2 V LDO) |
| Typical Power Consumption | — | 600 mW (1000Base-T link) |
| Faixa de temperatura de operação | — | -40 C to +85 C (industrial) |
| Auto-MDI/MDIX | — | Yes (HP Auto-MDIX, all speeds) |
| Energy Efficient Ethernet | — | Yes (IEEE 802.3az) |
| Cable Diagnostics | — | LinkMD cable fault detection |
| Number of Transceivers | — | 1 |
| AEC-Q100 Qualification | — | Yes (automotive grade) |
| Status RoHS | — | Compliant |