L6470H vs AMIS30542 Vergleich
Detaillierter Direktvergleich von L6470H von STMicroelectronics und AMIS30542 von onsemi. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
L6470H - dSPIN Stepper Motor Driver | STMicroelectronics | HTSSOP-28
L6470H ✓ Aktiv
Spezifikationsvergleich
| Parameter | L6470H | AMIS30542 |
|---|---|---|
| Marke | STMicroelectronics | onsemi |
| Kategorie | Motor Drivers | Motor Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,37 | $3,98 |
| Supply Voltage Range | 8 V to 45 V | — |
| Output Current (Peak) | 3 A per phase | — |
| Output Current (RMS) | 2.1 A per phase | — |
| Microstepping Resolution | Up to 1/128 step | — |
| Control Interface | SPI | — |
| Motion Engine | dSPIN™ with programmable acceleration/deceleration | — |
| Protection Features | Overcurrent, overtemperature, undervoltage lockout | — |
| Gehäuse | HTSSOP-28 (PowerSO-28) | NQFP-32 (7x7 mm) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperaturbereich | -40 °C to +150 °C | -40 C to +125 C |
| Thermal Resistance (θJA) | 25 °C/W | — |
| Logic Supply Voltage | 3.3 V or 5 V | — |
| Standby Current | 5 µA (typ) | — |
| RoHS-Status | Compliant | Compliant |
| MSL-Level | 3 (168 hours) | 3 |
| Motor Type | — | Bipolar stepper motor |
| Ausgangskonfiguration | — | Dual H-bridge (4 half-bridges) |
| Maximum Phase Current (RMS) | — | 1500 mA |
| Motor Supply Voltage (VBB) | — | 6 V to 30 V |
| Logic Supply Voltage (VDD) | — | 3.3 V or 5 V |
| Micro-Step Resolution | — | Up to 1/32 step (programmable via SPI) |
| On-Chip 5 V Regulator Output | — | 5 V (for external MCU, up to ~50 mA) |
| Communication Interface | — | SPI (4-wire, plus NXT/DIR pins) |
| Integrated Fly-back Diodes | — | Yes (active fly-back) |
| Thermal Protection | — | Thermal warning + thermal shutdown |
| Diagnostic Features | — | Short-to-ground, short-to-supply, open-load detection |
| SLA (Speed/Load Angle) Output | — | Yes (transparent back-EMF monitor) |