L6470H vs AMIS30542 Comparación
Comparación detallada lado a lado de L6470H por STMicroelectronics y AMIS30542 por onsemi. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
STMicroelectronics
L6470H - dSPIN Stepper Motor Driver | STMicroelectronics | HTSSOP-28
L6470H ✓ Activo
Comparación de especificaciones
| Parámetro | L6470H | AMIS30542 |
|---|---|---|
| Marca | STMicroelectronics | onsemi |
| Categoría | Motor Drivers | Motor Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $2,37 | $3,98 |
| Supply Voltage Range | 8 V to 45 V | — |
| Output Current (Peak) | 3 A per phase | — |
| Output Current (RMS) | 2.1 A per phase | — |
| Microstepping Resolution | Up to 1/128 step | — |
| Control Interface | SPI | — |
| Motion Engine | dSPIN™ with programmable acceleration/deceleration | — |
| Protection Features | Overcurrent, overtemperature, undervoltage lockout | — |
| Encapsulado | HTSSOP-28 (PowerSO-28) | NQFP-32 (7x7 mm) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Rango de temperatura de funcionamiento | -40 °C to +150 °C | -40 C to +125 C |
| Thermal Resistance (θJA) | 25 °C/W | — |
| Logic Supply Voltage | 3.3 V or 5 V | — |
| Standby Current | 5 µA (typ) | — |
| Estado RoHS | Compliant | Compliant |
| Nivel MSL | 3 (168 hours) | 3 |
| Motor Type | — | Bipolar stepper motor |
| Configuración de salida | — | Dual H-bridge (4 half-bridges) |
| Maximum Phase Current (RMS) | — | 1500 mA |
| Motor Supply Voltage (VBB) | — | 6 V to 30 V |
| Logic Supply Voltage (VDD) | — | 3.3 V or 5 V |
| Micro-Step Resolution | — | Up to 1/32 step (programmable via SPI) |
| On-Chip 5 V Regulator Output | — | 5 V (for external MCU, up to ~50 mA) |
| Communication Interface | — | SPI (4-wire, plus NXT/DIR pins) |
| Integrated Fly-back Diodes | — | Yes (active fly-back) |
| Thermal Protection | — | Thermal warning + thermal shutdown |
| Diagnostic Features | — | Short-to-ground, short-to-supply, open-load detection |
| SLA (Speed/Load Angle) Output | — | Yes (transparent back-EMF monitor) |