LAN8720AI-CP-ABC vs KSZ8081RNACA Vergleich
Detaillierter Direktvergleich von LAN8720AI-CP-ABC von Microchip Technology und KSZ8081RNACA von Microchip Technology. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Microchip Technology
KSZ8081RNACA - 10/100 Ethernet PHY, RMII, 24-QFN | Microchip (Tape & Reel)
KSZ8081RNACA ✓ AktivSpezifikationsvergleich
| Parameter | LAN8720AI-CP-ABC | KSZ8081RNACA |
|---|---|---|
| Marke | Microchip Technology | Microchip Technology |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | 10/100 Ethernet PHY transceiver | 10/100BASE-TX Ethernet PHY Transceiver |
| Supported Data Rates | 10 Mbps and 100 Mbps | — |
| Ethernet Standards | 10BASE-T and 100BASE-TX | — |
| Host Interface | RMII | — |
| Duplex Support | Full-duplex | — |
| Cable Length | [DATA_NEEDED: maximum cable length] | — |
| Operating Supply Voltages | 1.8 V, 2.5 V, or 3.3 V | — |
| Supply Voltage Range | [DATA_NEEDED: minimum and maximum core supply voltage] | — |
| RMII Reference Clock | 50 MHz | — |
| Auto-Negotiation | Automatic speed and duplex selection | — |
| Auto-MDIX | HP Auto-MDIX supported | Yes (HP Auto-MDIX) |
| Register Compatibility | IEEE 802.3-2005-compliant and vendor-specific registers | — |
| Betriebstemperaturbereich | -40°C to 85°C | — |
| Gehäuse | 24-SQFN, 4 x 4 mm | 24-QFN (4x4 mm) with exposed pad |
| Pin-Anzahl | 24 pins | — |
| Montageart | Surface mount | Surface Mount |
| Power Technology | Microchip flexPWR technology | — |
| Exposed Thermal Pad | Present | — |
| RoHS Compliance | unknown | — |
| REACH Compliance | unknown | — |
| AEC-Q100 Qualification | unknown | — |
| Standard Qty per Tray | [DATA_NEEDED: standard tray quantity] | — |
| Schnittstelle | — | RMII v1.2 (Reduced Media Independent Interface) |
| Supply Voltage (VDDIO/VDDA) | — | 3.135 V to 3.465 V (3.3 V typical) |
| On-chip Core Voltage | — | 1.2 V (generated by internal LDO) |
| Datenrate | — | 10 Mbps / 100 Mbps (auto-negotiation) |
| Number of Transceivers | — | 1/1 (Full Duplex RMII) |
| Cable Type | — | CAT-3 / CAT-5 / CAT-5e UTP |
| Cable Reach | — | Up to 140 m (CAT-5) |
| Standards Compliance | — | IEEE 802.3, IEEE 802.3u |
| Reference Clock | — | 25 MHz crystal or 50 MHz RMII clock input |
| Management Interface | — | MDC/MDIO (SMI, IEEE 802.3u clause 22) |
| Betriebstemperatur | — | -40 C to +85 C (industrial) |
| MSL-Level | — | [DATA_NEEDED: MSL level] |
| RoHS-Status | — | Compliant |
| Strap-in Pins | — | PHYAD[1:0], Config (latched at reset de-assertion) |