LAN8720AI-CP-ABC vs KSZ8081RNACA Comparaison
Comparaison détaillée côte à côte de LAN8720AI-CP-ABC par Microchip Technology et KSZ8081RNACA par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
KSZ8081RNACA - 10/100 Ethernet PHY, RMII, 24-QFN | Microchip (Tape & Reel)
KSZ8081RNACA ✓ ActifComparaison des spécifications
| Paramètre | LAN8720AI-CP-ABC | KSZ8081RNACA |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | 10/100 Ethernet PHY transceiver | 10/100BASE-TX Ethernet PHY Transceiver |
| Supported Data Rates | 10 Mbps and 100 Mbps | — |
| Ethernet Standards | 10BASE-T and 100BASE-TX | — |
| Host Interface | RMII | — |
| Duplex Support | Full-duplex | — |
| Cable Length | [DATA_NEEDED: maximum cable length] | — |
| Operating Supply Voltages | 1.8 V, 2.5 V, or 3.3 V | — |
| Supply Voltage Range | [DATA_NEEDED: minimum and maximum core supply voltage] | — |
| RMII Reference Clock | 50 MHz | — |
| Auto-Negotiation | Automatic speed and duplex selection | — |
| Auto-MDIX | HP Auto-MDIX supported | Yes (HP Auto-MDIX) |
| Register Compatibility | IEEE 802.3-2005-compliant and vendor-specific registers | — |
| Plage de température de fonctionnement | -40°C to 85°C | — |
| Boîtier | 24-SQFN, 4 x 4 mm | 24-QFN (4x4 mm) with exposed pad |
| Nombre de broches | 24 pins | — |
| Type de montage | Surface mount | Surface Mount |
| Power Technology | Microchip flexPWR technology | — |
| Exposed Thermal Pad | Present | — |
| RoHS Compliance | unknown | — |
| REACH Compliance | unknown | — |
| AEC-Q100 Qualification | unknown | — |
| Standard Qty per Tray | [DATA_NEEDED: standard tray quantity] | — |
| Interface | — | RMII v1.2 (Reduced Media Independent Interface) |
| Supply Voltage (VDDIO/VDDA) | — | 3.135 V to 3.465 V (3.3 V typical) |
| On-chip Core Voltage | — | 1.2 V (generated by internal LDO) |
| Débit de données | — | 10 Mbps / 100 Mbps (auto-negotiation) |
| Number of Transceivers | — | 1/1 (Full Duplex RMII) |
| Cable Type | — | CAT-3 / CAT-5 / CAT-5e UTP |
| Cable Reach | — | Up to 140 m (CAT-5) |
| Standards Compliance | — | IEEE 802.3, IEEE 802.3u |
| Reference Clock | — | 25 MHz crystal or 50 MHz RMII clock input |
| Management Interface | — | MDC/MDIO (SMI, IEEE 802.3u clause 22) |
| Température de fonctionnement | — | -40 C to +85 C (industrial) |
| Niveau MSL | — | [DATA_NEEDED: MSL level] |
| Statut RoHS | — | Compliant |
| Strap-in Pins | — | PHYAD[1:0], Config (latched at reset de-assertion) |