LM224DG vs LM324D Vergleich
Detaillierter Direktvergleich von LM224DG von onsemi und LM324D von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
LM324D - Quad 36V Op Amp | Texas Instruments | SOIC-14 (Tape & Reel)
LM324D ✓ AktivSpezifikationsvergleich
| Parameter | LM224DG | LM324D |
|---|---|---|
| Marke | onsemi | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Quad operational amplifier | — |
| Number of Channels | 4 circuits | — |
| Amplifier Type | General-purpose operational amplifier | Quad general-purpose operational amplifier |
| Gain-Bandwidth Product | 1 MHz | — |
| Supply Voltage Range | 3 V to 32 V | 3 V to 36 V for B versions |
| Input Offset Voltage | 5 mV | Plus or minus 2 mV maximum for BA versions at 25 C |
| Common-Mode Rejection Ratio | 70 dB minimum | — |
| Input Type | True differential inputs | Differential input |
| Supply Configuration | Single supply or split supply | Single supply or split supply |
| Compensation | Internally frequency compensated | — |
| Gehäuse | 14-pin SOIC, 0.154 inch (3.90 mm) width | 14-pin SOIC |
| Montageart | Surface mount | Surface mount |
| Betriebstemperaturbereich | -25 C to +85 C | [DATA_NEEDED: operating temperature range] |
| RoHS-Status | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Number of Amplifiers | — | 4 |
| Architecture | — | Four independent high-gain frequency-compensated operational amplifiers |
| ESD Protection | — | 2 kV HBM for B, BA, and K versions |
| Input Filtering | — | Internal RF and EMI filter for B and BA versions |
| Frequency Compensation | — | Internal |
| Device Type | — | Low-power operational amplifier |
| Ausgangstyp | — | Single-ended output |
| Operating Class | — | Standard general purpose |
| AEC-Q100 Status | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| Gain Bandwidth Product | — | [DATA_NEEDED: gain bandwidth product] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Output Current | — | [DATA_NEEDED: output current] |
| Common-Mode Input Range | — | [DATA_NEEDED: common-mode input range] |
| Output Swing | — | [DATA_NEEDED: output swing] |