LM2901DR2 vs LM2901VDG Vergleich
Detaillierter Direktvergleich von LM2901DR2 von onsemi und LM2901VDG von onsemi. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | LM2901DR2 | LM2901VDG |
|---|---|---|
| Marke | onsemi | onsemi |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Comparator Type | Quad differential voltage comparator | General-purpose differential comparator |
| Number of Channels | 4 channels | 4 channels |
| Supply Voltage Range | 3 V to 36 V | — |
| Input Bias Current | 25 nA typical | 25 nA |
| Ausgangstyp | Open collector | Open-collector, CMOS and TTL compatible |
| Supply Configuration | Single supply or split supply | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | [DATA_NEEDED: input common-mode voltage range] |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 2 mV |
| Differential Input Voltage | [DATA_NEEDED: maximum differential input voltage] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | [DATA_NEEDED: output sink current] |
| Output Saturation Voltage | [DATA_NEEDED: output saturation voltage] | — |
| Versorgungsstrom | [DATA_NEEDED: supply current] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | -40°C to +125°C |
| Gehäuse | 14-pin SOIC | 14-SOIC, 0.154 inch / 3.90 mm width |
| Montageart | Surface mount | Surface mount |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification] |
| Single-Supply Voltage Range | — | 3 V to 36 V |
| Dual-Supply Voltage Range | — | ±1.5 V to ±18 V |
| Tested Maximum Supply Voltage | — | 30 V |
| Supply-Current Drain | — | 0.8 mA typical |
| Manufacturer Description | — | Single-supply quad comparator |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Differential Input Voltage Range | — | [DATA_NEEDED: differential input voltage range] |
| Response Time | — | [DATA_NEEDED: comparator response time] |