LM2901DR2 vs LM2901VDG Comparaison
Comparaison détaillée côte à côte de LM2901DR2 par onsemi et LM2901VDG par onsemi. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | LM2901DR2 | LM2901VDG |
|---|---|---|
| Marque | onsemi | onsemi |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Comparator Type | Quad differential voltage comparator | General-purpose differential comparator |
| Number of Channels | 4 channels | 4 channels |
| Supply Voltage Range | 3 V to 36 V | — |
| Input Bias Current | 25 nA typical | 25 nA |
| Type de sortie | Open collector | Open-collector, CMOS and TTL compatible |
| Supply Configuration | Single supply or split supply | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | [DATA_NEEDED: input common-mode voltage range] |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 2 mV |
| Differential Input Voltage | [DATA_NEEDED: maximum differential input voltage] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | [DATA_NEEDED: output sink current] |
| Output Saturation Voltage | [DATA_NEEDED: output saturation voltage] | — |
| Courant d'alimentation | [DATA_NEEDED: supply current] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | -40°C to +125°C |
| Boîtier | 14-pin SOIC | 14-SOIC, 0.154 inch / 3.90 mm width |
| Type de montage | Surface mount | Surface mount |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification] |
| Single-Supply Voltage Range | — | 3 V to 36 V |
| Dual-Supply Voltage Range | — | ±1.5 V to ±18 V |
| Tested Maximum Supply Voltage | — | 30 V |
| Supply-Current Drain | — | 0.8 mA typical |
| Manufacturer Description | — | Single-supply quad comparator |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Differential Input Voltage Range | — | [DATA_NEEDED: differential input voltage range] |
| Response Time | — | [DATA_NEEDED: comparator response time] |