LM2901VD vs LM2901VDG Vergleich
Detaillierter Direktvergleich von LM2901VD von onsemi und LM2901VDG von onsemi. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | LM2901VD | LM2901VDG |
|---|---|---|
| Marke | onsemi | onsemi |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Comparator Type | 4-channel differential comparator | General-purpose differential comparator |
| Supply Voltage Range | 3 V to 36 V | — |
| Input Bias Current | 25 nA typical | 25 nA |
| Input Offset Current | ±5.0 nA typical | — |
| Ausgangstyp | Open collector | Open-collector, CMOS and TTL compatible |
| Logic Compatibility | TTL compatible | — |
| Supply Configuration | Single or split supply | — |
| Number of Channels | 4 | 4 channels |
| Gehäuse | 14-pin SOIC | 14-SOIC, 0.154 inch / 3.90 mm width |
| Montageart | Surface mount | Surface mount |
| Primary Application | Level detection, low-level sensing, and memory applications | — |
| Automotive Qualification | [DATA_NEEDED: automotive qualification status] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | -40°C to +125°C |
| Common-Mode Input Voltage Range | [DATA_NEEDED: common-mode input voltage range] | — |
| Differential Input Voltage Range | [DATA_NEEDED: differential input voltage range] | [DATA_NEEDED: differential input voltage range] |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | [DATA_NEEDED: output sink current] |
| Output Saturation Voltage | [DATA_NEEDED: output saturation voltage] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Single-Supply Voltage Range | — | 3 V to 36 V |
| Dual-Supply Voltage Range | — | ±1.5 V to ±18 V |
| Tested Maximum Supply Voltage | — | 30 V |
| Input Offset Voltage | — | 2 mV |
| Supply-Current Drain | — | 0.8 mA typical |
| Manufacturer Description | — | Single-supply quad comparator |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Response Time | — | [DATA_NEEDED: comparator response time] |