LM2901VD vs LM2901VDG Comparaison
Comparaison détaillée côte à côte de LM2901VD par onsemi et LM2901VDG par onsemi. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | LM2901VD | LM2901VDG |
|---|---|---|
| Marque | onsemi | onsemi |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Comparator Type | 4-channel differential comparator | General-purpose differential comparator |
| Supply Voltage Range | 3 V to 36 V | — |
| Input Bias Current | 25 nA typical | 25 nA |
| Input Offset Current | ±5.0 nA typical | — |
| Type de sortie | Open collector | Open-collector, CMOS and TTL compatible |
| Logic Compatibility | TTL compatible | — |
| Supply Configuration | Single or split supply | — |
| Number of Channels | 4 | 4 channels |
| Boîtier | 14-pin SOIC | 14-SOIC, 0.154 inch / 3.90 mm width |
| Type de montage | Surface mount | Surface mount |
| Primary Application | Level detection, low-level sensing, and memory applications | — |
| Automotive Qualification | [DATA_NEEDED: automotive qualification status] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | -40°C to +125°C |
| Common-Mode Input Voltage Range | [DATA_NEEDED: common-mode input voltage range] | — |
| Differential Input Voltage Range | [DATA_NEEDED: differential input voltage range] | [DATA_NEEDED: differential input voltage range] |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | [DATA_NEEDED: output sink current] |
| Output Saturation Voltage | [DATA_NEEDED: output saturation voltage] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Single-Supply Voltage Range | — | 3 V to 36 V |
| Dual-Supply Voltage Range | — | ±1.5 V to ±18 V |
| Tested Maximum Supply Voltage | — | 30 V |
| Input Offset Voltage | — | 2 mV |
| Supply-Current Drain | — | 0.8 mA typical |
| Manufacturer Description | — | Single-supply quad comparator |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Response Time | — | [DATA_NEEDED: comparator response time] |