LM2902KDG4 vs LM2902KDBR Vergleich
Detaillierter Direktvergleich von LM2902KDG4 von Texas Instruments und LM2902KDBR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
LM2902KDBR - Quad 26V 1.2MHz Op Amp | Texas Instruments (Tape & Reel)
LM2902KDBR ✓ AktivSpezifikationsvergleich
| Parameter | LM2902KDG4 | LM2902KDBR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Ende des Lebenszyklus | Aktiv |
| Product Type | General-purpose operational amplifier | — |
| Number of Amplifier Channels | 4 channels | 4 channels |
| Maximum Supply Voltage | 26 V | 26 V |
| Gain-Bandwidth Product | 1.2 MHz | 1.2 MHz |
| Improved ESD Capability | 2 kV | — |
| Gehäuse | 14-SOIC | 14-pin SSOP (DB) |
| Package Body Width | 3.90 mm (0.154 inch) | — |
| Montageart | Through-hole | Surface mount |
| Anzahl der Pins | 14 pins | — |
| Channel 1 Output Pin | Pin 1 | — |
| Channel 2 Output Pin | Pin 7 | — |
| Channel 3 Output Pin | Pin 8 | — |
| Channel 4 Output Pin | Pin 14 | — |
| Positive Supply Pin | Pin 12 | — |
| Negative Supply Pin | Pin 4 | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | -40°C to +125°C |
| Versorgungsstrom | [DATA_NEEDED: supply current] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate] |
| Output Current | [DATA_NEEDED: output current] | [DATA_NEEDED: output current] |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input range] | Includes ground |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Unknown |
| REACH Status | [DATA_NEEDED: REACH status] | Unknown |
| Amplifier Type | — | General-purpose operational amplifier |
| ESD Protection | — | 2 kV improved ESD |
| Typical Input Offset Voltage | — | 3 mV |
| Typical Input Offset Current | — | 2 nA |
| Typical Supply-Current Drain | — | 0.8 mA |
| Package Width | — | 5.30 mm |
| Device Family | — | LM2902K improved LM2902B generation |
| AEC-Q100 Qualification | — | Unknown |
| Lead-Free Status | — | Unknown |
| Total Supply Voltage | — | [DATA_NEEDED: total supply voltage including ground connection] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Unity-Gain Bandwidth | — | [DATA_NEEDED: unity-gain bandwidth] |