LM2902KNSE4 vs LM324ADRG4 Vergleich
Detaillierter Direktvergleich von LM2902KNSE4 von Texas Instruments und LM324ADRG4 von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | LM2902KNSE4 | LM324ADRG4 |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Amplifier Type | General Purpose | — |
| Number of Circuits | 4 | — |
| Gain Bandwidth Product | 1.2 MHz | — |
| Slew Rate | 0.5 V/us | 0.5 V/us |
| Supply Voltage Range (Single) | 3 V to 26 V | — |
| Supply Voltage Range (Dual) | +/-13 V | — |
| Quiescent Current (Per Amplifier, Typ) | 0.8 mA | — |
| ESD Rating | 2 kV (improved LM2902K) | — |
| Temperature Grade | Automotive | — |
| Gehäuse / Bauform | 14-SOIC (0.209 in, 5.30 mm width) | — |
| Montageart | Surface Mount | Surface mount |
| Terminal Form | Gull Wing | — |
| Packaging | Tube | — |
| Number of Terminals | 14 | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Product Type | — | Quadruple operational amplifier |
| Number of Amplifier Circuits | — | 4 circuits |
| Gain-Bandwidth Product | — | 1.2 MHz |
| Minimum Total Supply Voltage | — | ±1.5 V |
| Maximum Total Supply Voltage | — | ±16 V |
| Typical Supply Current Drain | — | 0.8 mA |
| Common-Mode Input Range | — | Includes ground |
| Amplifier Architecture | — | Four independent, high-gain, frequency-compensated amplifiers |
| Supply Configuration | — | Single supply or split supply |
| Gehäuse | — | 14-pin SOIC |
| Pin-Anzahl | — | 14 pins |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Output Current | — | [DATA_NEEDED: output current] |
| REACH Status | — | [DATA_NEEDED: REACH status] |