LM2902KNSE4 vs LM324ADRG4 Karşılaştırma
Ayrıntılı yan yana karşılaştırma LM2902KNSE4 tarafından Texas Instruments ve LM324ADRG4 tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | LM2902KNSE4 | LM324ADRG4 |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Amplifier Type | General Purpose | — |
| Number of Circuits | 4 | — |
| Gain Bandwidth Product | 1.2 MHz | — |
| Slew Rate | 0.5 V/us | 0.5 V/us |
| Supply Voltage Range (Single) | 3 V to 26 V | — |
| Supply Voltage Range (Dual) | +/-13 V | — |
| Quiescent Current (Per Amplifier, Typ) | 0.8 mA | — |
| ESD Rating | 2 kV (improved LM2902K) | — |
| Temperature Grade | Automotive | — |
| Paket / Kas | 14-SOIC (0.209 in, 5.30 mm width) | — |
| Montaj Türü | Surface Mount | Surface mount |
| Terminal Form | Gull Wing | — |
| Packaging | Tube | — |
| Number of Terminals | 14 | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Product Type | — | Quadruple operational amplifier |
| Number of Amplifier Circuits | — | 4 circuits |
| Gain-Bandwidth Product | — | 1.2 MHz |
| Minimum Total Supply Voltage | — | ±1.5 V |
| Maximum Total Supply Voltage | — | ±16 V |
| Typical Supply Current Drain | — | 0.8 mA |
| Common-Mode Input Range | — | Includes ground |
| Amplifier Architecture | — | Four independent, high-gain, frequency-compensated amplifiers |
| Supply Configuration | — | Single supply or split supply |
| Paket | — | 14-pin SOIC |
| Pin Sayısı | — | 14 pins |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Output Current | — | [DATA_NEEDED: output current] |
| REACH Status | — | [DATA_NEEDED: REACH status] |