LM2902PWR vs LM2902PWRG3 Vergleich

Detaillierter Direktvergleich von LM2902PWR von Texas Instruments und LM2902PWRG3 von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

Texas Instruments
LM2902PWR LM2902PWR - Quad 36V 1.2MHz Op Amp | Texas Instruments

LM2902PWR - Quad 36V 1.2MHz Op Amp | Texas Instruments

LM2902PWR ✓ Aktiv
Texas Instruments
LM2902PWRG3 LM2902PWRG3 - 26V Quad 1.2MHz Op Amp | Texas Instruments

LM2902PWRG3 - 26V Quad 1.2MHz Op Amp | Texas Instruments

LM2902PWRG3 ✓ Aktiv

Spezifikationsvergleich

Parameter LM2902PWR LM2902PWRG3
Marke Texas Instruments Texas Instruments
Kategorie Amplifier ICs Amplifier ICs
Lebenszyklusstatus Aktiv Aktiv
Amplifier Count 4 circuits —
Product Type General-purpose operational amplifier —
Nominal Supply Voltage 26 V —
Maximum Supply Voltage 36 V 26 V
Supply Voltage Range 3 V to 36 V for B and BA versions —
Gain-Bandwidth Product 1.2 MHz 1.2 MHz
Input Offset Voltage 2 mV maximum at 25°C for BA versions, LM2902A, and LM124A 2 mV
Common-Mode Input Range Extends to ground —
Differential Input Voltage Capability High differential input voltage capability —
Internal Compensation Frequency compensated —
Package Type 14-TSSOP —
Montageart Surface mount Surface mount
Channel Independence 4 independent amplifiers —
RoHS-Status [DATA_NEEDED: RoHS status] unknown
REACH Status [DATA_NEEDED: REACH status] unknown
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] not_applicable
Lead-Free Status [DATA_NEEDED: lead-free status] —
Betriebstemperaturbereich [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Output Current [DATA_NEEDED: output current] —
Input Bias Current [DATA_NEEDED: input bias current] —
Slew Rate [DATA_NEEDED: slew rate] 0.5 V/µs
Packaging Quantity [DATA_NEEDED: standard packaging quantity] —
Number of Amplifiers — 4 amplifiers
Amplifier Type — General-purpose
Supply Current Drain — 0.8 mA typical
Supply Configuration — Single supply or split supply
Gehäuse — 14-pin TSSOP (PW), 4.40 mm width
Packaging — Tape and reel (TR)
Lead Pitch — 0.65 mm
Input Common-Mode Voltage Range — [DATA_NEEDED: input common-mode voltage range]
Output Voltage Swing — [DATA_NEEDED: output voltage swing]
Open-Loop Gain — [DATA_NEEDED: open-loop gain]
Unity-Gain Bandwidth — [DATA_NEEDED: unity-gain bandwidth]

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern