LM2903D vs LM2903AVQDRQ1 Vergleich
Detaillierter Direktvergleich von LM2903D von Texas Instruments und LM2903AVQDRQ1 von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
LM2903AVQDRQ1 - 36V AEC-Q100 Dual Open-Collector Comparator | Texas Instruments
LM2903AVQDRQ1 ✓ AktivSpezifikationsvergleich
| Parameter | LM2903D | LM2903AVQDRQ1 |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Comparator Type | Dual differential comparator | Differential, general purpose |
| Number of Channels | 2 channels | 2 |
| Supply Voltage Range | 2 V to 36 V | — |
| Ausgangstyp | Open-collector | Open-Collector / Open-Drain, Rail-to-Rail |
| Response Time | 300 ns | — |
| Gehäuse | 8-pin SOIC | 8-SOIC (D), 0.154 in (3.90 mm) body width |
| Montageart | Surface mount | Surface Mount |
| Betriebstemperaturbereich | -40 °C to +125 °C | -40 C to +125 C |
| Supply Configuration | Single supply or split supply | — |
| Channel Independence | Two independent comparator channels | — |
| Output Logic Style | Open-collector, pull-up resistor required | — |
| Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Ruhestrom | [DATA_NEEDED: supply current per channel] | — |
| Propagation Delay | 300 ns response time | 1.3 us |
| Output High Voltage | [DATA_NEEDED: output high-level voltage with pull-up] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance statement] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | AEC-Q100 Grade 0 and Grade 1 |
| Supply Voltage Range, Single | — | 2 V to 36 V |
| Supply Voltage Range, Dual | — | +/-1 V to +/-18 V |
| Input Common-Mode Range | — | Rail-to-Rail |
| Versorgungsstrom | — | 0.4 mA per channel (distributor specification listing) |
| Differential Input Voltage Range | — | [DATA_NEEDED: maximum differential input voltage] |
| ESD Qualification Test | — | MIL-STD-883, Method 3015 |
| Anzahl der Pins | — | 8 |
| Supply Voltage Independent Supply Current | — | Yes, low supply-current drain independent of supply voltage |
| Lead Finish | — | [DATA_NEEDED: lead finish / lead-free status] |