LM2903D vs LM2903AVQDRQ1 Comparación
Comparación detallada lado a lado de LM2903D por Texas Instruments y LM2903AVQDRQ1 por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
LM2903AVQDRQ1 - 36V AEC-Q100 Dual Open-Collector Comparator | Texas Instruments
LM2903AVQDRQ1 ✓ ActivoComparación de especificaciones
| Parámetro | LM2903D | LM2903AVQDRQ1 |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Comparator Type | Dual differential comparator | Differential, general purpose |
| Number of Channels | 2 channels | 2 |
| Supply Voltage Range | 2 V to 36 V | — |
| Tipo de salida | Open-collector | Open-Collector / Open-Drain, Rail-to-Rail |
| Response Time | 300 ns | — |
| Encapsulado | 8-pin SOIC | 8-SOIC (D), 0.154 in (3.90 mm) body width |
| Tipo de montaje | Surface mount | Surface Mount |
| Rango de temperatura de funcionamiento | -40 °C to +125 °C | -40 C to +125 C |
| Supply Configuration | Single supply or split supply | — |
| Channel Independence | Two independent comparator channels | — |
| Output Logic Style | Open-collector, pull-up resistor required | — |
| Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Corriente en reposo | [DATA_NEEDED: supply current per channel] | — |
| Propagation Delay | 300 ns response time | 1.3 us |
| Output High Voltage | [DATA_NEEDED: output high-level voltage with pull-up] | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance statement] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | AEC-Q100 Grade 0 and Grade 1 |
| Supply Voltage Range, Single | — | 2 V to 36 V |
| Supply Voltage Range, Dual | — | +/-1 V to +/-18 V |
| Input Common-Mode Range | — | Rail-to-Rail |
| Corriente de alimentación | — | 0.4 mA per channel (distributor specification listing) |
| Differential Input Voltage Range | — | [DATA_NEEDED: maximum differential input voltage] |
| ESD Qualification Test | — | MIL-STD-883, Method 3015 |
| Número de pines | — | 8 |
| Supply Voltage Independent Supply Current | — | Yes, low supply-current drain independent of supply voltage |
| Lead Finish | — | [DATA_NEEDED: lead finish / lead-free status] |