LM2904BIDR vs LM2904DR2G Vergleich
Detaillierter Direktvergleich von LM2904BIDR von Texas Instruments und LM2904DR2G von onsemi. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | LM2904BIDR | LM2904DR2G |
|---|---|---|
| Marke | Texas Instruments | onsemi |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Manufacturer | Texas Instruments | — |
| Funktion | Industry-standard dual operational amplifier | — |
| Number of Channels | 2 (Dual) | — |
| Supply Voltage Range (Single) | 3 V to 36 V | — |
| Supply Voltage Range (Dual) | +/-1.5 V to +/-18 V | — |
| Gain-Bandwidth Product (GBW) | 1.2 MHz | — |
| Slew Rate | 0.5 V/us (typical) | [DATA_NEEDED: slew rate] |
| Input Offset Voltage | 0.5 mV typical / 3 mV maximum | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | 25 nA typical | [DATA_NEEDED: input bias current] |
| Input Common-Mode Range | GND to VCC - 1.5 V (single supply) | — |
| Output Swing | Rail-to-rail output | — |
| Betriebstemperaturbereich | -40 C to +125 C | -40°C to +105°C |
| Gehäuse | SOIC-8 (D) | 8-SOIC |
| Montageart | Surface Mount | Surface mount |
| MSL-Level | 1 (Unlimited) | — |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free | Yes | — |
| Number of Amplifier Channels | — | 2 channels |
| Supply Voltage Range | — | 3 V to 32 V |
| Supply Configuration | — | Single supply or split supply |
| Common-Mode Input Range | — | Extends to ground or VEE |
| Power Consumption | — | Low power drain |
| Operational Amplifier Architecture | — | Bipolar |
| Amplifier Type | — | General purpose |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Gain-Bandwidth Product | — | [DATA_NEEDED: gain-bandwidth product] |
| Output Current | — | [DATA_NEEDED: output current] |
| Unity-Gain Stability | — | [DATA_NEEDED: unity-gain stability] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |