LM2904BIDR vs LM2904DR2G Comparaison
Comparaison détaillée côte à côte de LM2904BIDR par Texas Instruments et LM2904DR2G par onsemi. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | LM2904BIDR | LM2904DR2G |
|---|---|---|
| Marque | Texas Instruments | onsemi |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Manufacturer | Texas Instruments | — |
| Fonction | Industry-standard dual operational amplifier | — |
| Number of Channels | 2 (Dual) | — |
| Supply Voltage Range (Single) | 3 V to 36 V | — |
| Supply Voltage Range (Dual) | +/-1.5 V to +/-18 V | — |
| Gain-Bandwidth Product (GBW) | 1.2 MHz | — |
| Slew Rate | 0.5 V/us (typical) | [DATA_NEEDED: slew rate] |
| Input Offset Voltage | 0.5 mV typical / 3 mV maximum | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | 25 nA typical | [DATA_NEEDED: input bias current] |
| Input Common-Mode Range | GND to VCC - 1.5 V (single supply) | — |
| Output Swing | Rail-to-rail output | — |
| Plage de température de fonctionnement | -40 C to +125 C | -40°C to +105°C |
| Boîtier | SOIC-8 (D) | 8-SOIC |
| Type de montage | Surface Mount | Surface mount |
| Niveau MSL | 1 (Unlimited) | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free | Yes | — |
| Number of Amplifier Channels | — | 2 channels |
| Supply Voltage Range | — | 3 V to 32 V |
| Supply Configuration | — | Single supply or split supply |
| Common-Mode Input Range | — | Extends to ground or VEE |
| Power Consumption | — | Low power drain |
| Operational Amplifier Architecture | — | Bipolar |
| Amplifier Type | — | General purpose |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Gain-Bandwidth Product | — | [DATA_NEEDED: gain-bandwidth product] |
| Output Current | — | [DATA_NEEDED: output current] |
| Unity-Gain Stability | — | [DATA_NEEDED: unity-gain stability] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |