LM2904DT vs LM2904QDRG4Q1 Vergleich
Detaillierter Direktvergleich von LM2904DT von STMicroelectronics und LM2904QDRG4Q1 von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
LM2904DT - Dual 1.1MHz General Purpose Op Amp | STMicroelectronics | SOIC-8
LM2904DT ✓ AktivTexas Instruments
LM2904QDRG4Q1 - Dual 26 V AEC-Q100 Op Amp, 700 kHz, SOIC-8 | Texas Instruments
LM2904QDRG4Q1 ✓ AktivSpezifikationsvergleich
| Parameter | LM2904DT | LM2904QDRG4Q1 |
|---|---|---|
| Marke | STMicroelectronics | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Number of Amplifiers | 2 | — |
| Number of Channels | 2 | — |
| Amplifier Type | Standard (General Purpose) | General Purpose, single-supply |
| Ausgangstyp | Single-Ended | — |
| Gain | High gain, internally frequency-compensated | — |
| Gain-Bandwidth Product | 1.1 MHz | — |
| Operating Voltage (listing designation) | 15 V | — |
| Maximum Supply Voltage | [DATA_NEEDED: maximum supply voltage rating] | 26 V |
| Supply Type | Single supply | — |
| Power Supply Drain | Low, independent of output voltage swing magnitude | — |
| Frequency Compensation | Internal (no external compensation network) | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Slew Rate | [DATA_NEEDED: slew rate] | 0.3 V/us |
| Output Current | [DATA_NEEDED: output current capability] | — |
| Gehäuse | SOIC-8 (8-SOIC / SOP-8) | 8-SOIC (DBV), 0.154 in (3.90 mm) width |
| Pin-Anzahl | 8 | — |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | — |
| Target Applications | Automotive and industrial control systems | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant |
| Number of Circuits | — | 2 (independent channels) |
| Supply Voltage Range | — | 3 V to 26 V |
| Gain Bandwidth Product | — | 700 kHz |
| Supply Current (per amplifier) | — | 0.7 mA typical |
| Common-Mode Rejection Ratio (CMRR) | — | 65 dB |
| Automotive Qualification | — | AEC-Q100 qualified |
| Packaging | — | Tape and Reel (TR) |
| Anzahl der Pins | — | 8 |
| Compensation | — | Internal (internally compensated) |
| Output Swing | — | [DATA_NEEDED: output voltage swing] |
| Common-Mode Input Voltage Range | — | Includes ground; upper limit [DATA_NEEDED: common-mode input voltage range maximum] |
| Shutdown / Enable | — | None (no shutdown pin) |