LM2904DT vs LM2904QDRG4Q1 Comparaison
Comparaison détaillée côte à côte de LM2904DT par STMicroelectronics et LM2904QDRG4Q1 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
LM2904DT - Dual 1.1MHz General Purpose Op Amp | STMicroelectronics | SOIC-8
LM2904DT ✓ ActifTexas Instruments
LM2904QDRG4Q1 - Dual 26 V AEC-Q100 Op Amp, 700 kHz, SOIC-8 | Texas Instruments
LM2904QDRG4Q1 ✓ ActifComparaison des spécifications
| Paramètre | LM2904DT | LM2904QDRG4Q1 |
|---|---|---|
| Marque | STMicroelectronics | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Number of Amplifiers | 2 | — |
| Number of Channels | 2 | — |
| Amplifier Type | Standard (General Purpose) | General Purpose, single-supply |
| Type de sortie | Single-Ended | — |
| Gain | High gain, internally frequency-compensated | — |
| Gain-Bandwidth Product | 1.1 MHz | — |
| Operating Voltage (listing designation) | 15 V | — |
| Maximum Supply Voltage | [DATA_NEEDED: maximum supply voltage rating] | 26 V |
| Supply Type | Single supply | — |
| Power Supply Drain | Low, independent of output voltage swing magnitude | — |
| Frequency Compensation | Internal (no external compensation network) | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Slew Rate | [DATA_NEEDED: slew rate] | 0.3 V/us |
| Output Current | [DATA_NEEDED: output current capability] | — |
| Boîtier | SOIC-8 (8-SOIC / SOP-8) | 8-SOIC (DBV), 0.154 in (3.90 mm) width |
| Nombre de broches | 8 | — |
| Type de montage | Surface Mount | Surface Mount |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Target Applications | Automotive and industrial control systems | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| Number of Circuits | — | 2 (independent channels) |
| Supply Voltage Range | — | 3 V to 26 V |
| Gain Bandwidth Product | — | 700 kHz |
| Supply Current (per amplifier) | — | 0.7 mA typical |
| Common-Mode Rejection Ratio (CMRR) | — | 65 dB |
| Automotive Qualification | — | AEC-Q100 qualified |
| Packaging | — | Tape and Reel (TR) |
| Nombre de broches | — | 8 |
| Compensation | — | Internal (internally compensated) |
| Output Swing | — | [DATA_NEEDED: output voltage swing] |
| Common-Mode Input Voltage Range | — | Includes ground; upper limit [DATA_NEEDED: common-mode input voltage range maximum] |
| Shutdown / Enable | — | None (no shutdown pin) |