LM2904VQPWR vs LM2904PWR Vergleich
Detaillierter Direktvergleich von LM2904VQPWR von Texas Instruments und LM2904PWR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
LM2904PWR - Dual 700 kHz Op Amp, 26 V | Texas Instruments (Tape & Reel)
LM2904PWR ✓ AktivSpezifikationsvergleich
| Parameter | LM2904VQPWR | LM2904PWR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Amplifier Type | Dual general-purpose operational amplifier | — |
| Number of Channels | 2 channels | — |
| Maximum Supply Voltage | 30 V | 26 V |
| Gain-Bandwidth Product | 700 kHz | 700 kHz |
| Betriebstemperaturbereich | -40 °C to 125 °C | [DATA_NEEDED: operating temperature range] |
| Supply Configuration | Single supply or split supply | — |
| Gehäuse | 8-pin TSSOP (PW) | 8-TSSOP, 4.40 mm width |
| Package Type | TSSOP | — |
| Pin-Anzahl | 8 pins | — |
| Montageart | Surface mount | Surface mount |
| Amplifier Sections | 2 independent, high-gain, frequency-compensated sections | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | — |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate] |
| Output Current | [DATA_NEEDED: output current] | — |
| Input Noise Density | [DATA_NEEDED: input noise density] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Number of Amplifiers | — | 2 circuits |
| Product Type | — | Dual general-purpose operational amplifier |
| Typical Supply Current | — | 0.7 mA |
| Supply-Current Independence | — | Independent of supply voltage |
| Supported Supply Configurations | — | Single supply or split supply |
| Common-Mode Input Range | — | Includes ground |
| Architecture | — | Voltage feedback, internally frequency compensated |
| Package Length | — | 4.40 mm |