LM2904VQPWR vs LM2904PWR So sánh
So sánh chi tiết song song của LM2904VQPWR bằng Texas Instruments và LM2904PWR bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
LM2904PWR - Dual 700 kHz Op Amp, 26 V | Texas Instruments (Tape & Reel)
LM2904PWR ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | LM2904VQPWR | LM2904PWR |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Amplifier Type | Dual general-purpose operational amplifier | — |
| Number of Channels | 2 channels | — |
| Maximum Supply Voltage | 30 V | 26 V |
| Gain-Bandwidth Product | 700 kHz | 700 kHz |
| Khoảng nhiệt độ hoạt động | -40 °C to 125 °C | [DATA_NEEDED: operating temperature range] |
| Supply Configuration | Single supply or split supply | — |
| Hộp | 8-pin TSSOP (PW) | 8-TSSOP, 4.40 mm width |
| Package Type | TSSOP | — |
| Số chân | 8 pins | — |
| Kiểu lắp đặt | Surface mount | Surface mount |
| Amplifier Sections | 2 independent, high-gain, frequency-compensated sections | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | — |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate] |
| Output Current | [DATA_NEEDED: output current] | — |
| Input Noise Density | [DATA_NEEDED: input noise density] | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Number of Amplifiers | — | 2 circuits |
| Product Type | — | Dual general-purpose operational amplifier |
| Typical Supply Current | — | 0.7 mA |
| Supply-Current Independence | — | Independent of supply voltage |
| Supported Supply Configurations | — | Single supply or split supply |
| Common-Mode Input Range | — | Includes ground |
| Architecture | — | Voltage feedback, internally frequency compensated |
| Package Length | — | 4.40 mm |