LM324D vs LM224DG Vergleich
Detaillierter Direktvergleich von LM324D von Texas Instruments und LM224DG von onsemi. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
LM324D - Quad 36V Op Amp | Texas Instruments | SOIC-14 (Tape & Reel)
LM324D ✓ AktivSpezifikationsvergleich
| Parameter | LM324D | LM224DG |
|---|---|---|
| Marke | Texas Instruments | onsemi |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Amplifier Type | Quad general-purpose operational amplifier | General-purpose operational amplifier |
| Number of Amplifiers | 4 | — |
| Architecture | Four independent high-gain frequency-compensated operational amplifiers | — |
| Supply Voltage Range | 3 V to 36 V for B versions | 3 V to 32 V |
| Input Offset Voltage | Plus or minus 2 mV maximum for BA versions at 25 C | 5 mV |
| ESD Protection | 2 kV HBM for B, BA, and K versions | — |
| Input Filtering | Internal RF and EMI filter for B and BA versions | — |
| Supply Configuration | Single supply or split supply | Single supply or split supply |
| Frequency Compensation | Internal | — |
| Gehäuse | 14-pin SOIC | 14-pin SOIC, 0.154 inch (3.90 mm) width |
| Montageart | Surface mount | Surface mount |
| Device Type | Low-power operational amplifier | — |
| Input Type | Differential input | True differential inputs |
| Ausgangstyp | Single-ended output | — |
| Operating Class | Standard general purpose | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Status | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | -25 C to +85 C |
| Gain Bandwidth Product | [DATA_NEEDED: gain bandwidth product] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Output Current | [DATA_NEEDED: output current] | — |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input range] | — |
| Output Swing | [DATA_NEEDED: output swing] | — |
| Product Type | — | Quad operational amplifier |
| Number of Channels | — | 4 circuits |
| Gain-Bandwidth Product | — | 1 MHz |
| Common-Mode Rejection Ratio | — | 70 dB minimum |
| Compensation | — | Internally frequency compensated |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |