LM339PWRG4 vs LM339APWRG4 Vergleich
Detaillierter Direktvergleich von LM339PWRG4 von Texas Instruments und LM339APWRG4 von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
LM339APWRG4 - Quad Open-Collector Comparator | Texas Instruments
LM339APWRG4 ✓ AktivSpezifikationsvergleich
| Parameter | LM339PWRG4 | LM339APWRG4 |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Comparator Type | General-purpose differential comparator | Quad differential comparator |
| Number of Channels | 4 channels | 4 channels |
| Supply Configuration | Single supply or dual supply | — |
| Supply Voltage Range | [DATA_NEEDED: operating supply-voltage range] | 2 V to 36 V |
| Maximum-Rated Supply Voltage | 30 V for non-V devices | — |
| Tested Supply Voltage | 32 V for non-V devices | — |
| Typical Supply-Current Drain | 0.8 mA | — |
| Input Bias Current | [DATA_NEEDED: typical input-bias current] | Low input bias current |
| Common-Mode Input Voltage Range | Includes ground | — |
| Differential Input Voltage Range | Equal to maximum-rated supply voltage | — |
| Ausgangstyp | Open collector | Open collector |
| Logic Compatibility | Compatible with TTL, MOS, and CMOS | Compatible with TTL, MOS, and CMOS |
| Output Saturation Voltage | Low; exact value not stated | — |
| Gehäuse | 14-TSSOP, 4.40 mm width | 14-pin TSSOP |
| Pin-Anzahl | 14 pins | — |
| Montageart | Surface mount | Surface mount |
| Betriebstemperaturbereich | 0 °C to [DATA_NEEDED: maximum operating temperature] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | Compliant |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| Maximum Supply Voltage | — | 36 V |
| Supply Current Drain | — | 0.8 mA typical |
| Differential Input Voltage | — | Equal to maximum-rated supply voltage |
| Common-Mode Input Voltage | — | Includes ground |
| Operating Configuration | — | Single supply or split supply |
| Comparator Response Time | — | 300 ns |
| Output Pull-Up Requirement | — | External pull-up resistor required |