LM339PWRG4 vs LM339APWRG4 比較
詳細な並列比較: LM339PWRG4 メーカー: Texas Instruments および LM339APWRG4 メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Texas Instruments
LM339APWRG4 - Quad Open-Collector Comparator | Texas Instruments
LM339APWRG4 ✓ 生産中仕様比較
| パラメータ | LM339PWRG4 | LM339APWRG4 |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Interface ICs | Amplifier ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Comparator Type | General-purpose differential comparator | Quad differential comparator |
| Number of Channels | 4 channels | 4 channels |
| Supply Configuration | Single supply or dual supply | — |
| Supply Voltage Range | [DATA_NEEDED: operating supply-voltage range] | 2 V to 36 V |
| Maximum-Rated Supply Voltage | 30 V for non-V devices | — |
| Tested Supply Voltage | 32 V for non-V devices | — |
| Typical Supply-Current Drain | 0.8 mA | — |
| Input Bias Current | [DATA_NEEDED: typical input-bias current] | Low input bias current |
| Common-Mode Input Voltage Range | Includes ground | — |
| Differential Input Voltage Range | Equal to maximum-rated supply voltage | — |
| 出力タイプ | Open collector | Open collector |
| Logic Compatibility | Compatible with TTL, MOS, and CMOS | Compatible with TTL, MOS, and CMOS |
| Output Saturation Voltage | Low; exact value not stated | — |
| パッケージ | 14-TSSOP, 4.40 mm width | 14-pin TSSOP |
| ピン数 | 14 pins | — |
| 実装タイプ | Surface mount | Surface mount |
| 動作温度範囲 | 0 °C to [DATA_NEEDED: maximum operating temperature] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | Compliant |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| Maximum Supply Voltage | — | 36 V |
| Supply Current Drain | — | 0.8 mA typical |
| Differential Input Voltage | — | Equal to maximum-rated supply voltage |
| Common-Mode Input Voltage | — | Includes ground |
| Operating Configuration | — | Single supply or split supply |
| Comparator Response Time | — | 300 ns |
| Output Pull-Up Requirement | — | External pull-up resistor required |