LT1007CH vs LT1007ACP Vergleich

Detaillierter Direktvergleich von LT1007CH von Analog Devices und LT1007ACP von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

Analog Devices
LT1007CH LT1007CH - Low-Noise Precision Op Amp | Analog Devices

LT1007CH - Low-Noise Precision Op Amp | Analog Devices

LT1007CH ✓ Aktiv

Spezifikationsvergleich

Parameter LT1007CH LT1007ACP
Marke Analog Devices Texas Instruments
Kategorie Amplifier ICs Amplifier ICs
Lebenszyklusstatus Aktiv Unknown
Amplifier Type Single low-noise, high-speed precision operational amplifier —
Circuit Count 1 circuit —
Wideband Input Noise 2.5 nV/√Hz —
Guaranteed Noise at 10 Hz 4.5 nV/√Hz —
Guaranteed Noise at 1 kHz 3.8 nV/√Hz —
Low-Frequency Peak-to-Peak Noise 60 nV peak-to-peak from 0.1 Hz to 10 Hz —
1/f Corner Frequency 2 Hz —
Input Offset Voltage 10 µV —
Input Offset Voltage Drift 0.2 µV/°C —
Common-Mode Rejection 130 dB 130 dB
Power-Supply Rejection 130 dB 130 dB
Gehäuse TO-5 8-pin PDIP
Montageart Through-hole Through-hole
Betriebstemperaturbereich [DATA_NEEDED: operating temperature range] —
Supply Voltage Range [DATA_NEEDED: supply voltage range] —
Gain-Bandwidth Product [DATA_NEEDED: LT1007 gain-bandwidth product] 60 MHz on the decompensated LT1037
Input Bias Current [DATA_NEEDED: input bias current] —
RoHS Compliance [DATA_NEEDED: RoHS compliance status] —
REACH Compliance [DATA_NEEDED: REACH compliance status] —
Product Type — Low-noise, high-speed, precision operational amplifier
Number of Amplifiers — 1 amplifier
Maximum Equivalent Input Noise Voltage — 3.8 nV/sqrt(Hz) at 1 kHz
Equivalent Input Noise Voltage — 4.5 nV/sqrt(Hz) at 10 Hz
Low Peak-to-Peak Equivalent Input Noise Voltage — 60 nV typical from 10 Hz
Typical Input Offset Voltage — 10 uV
Input Voltage Drift — 0.2 uV/degree C
Typical Differential Voltage Gain — 20 V/uV at 25 degrees C with a 2 kOhm load to plus or minus 12 V
Minimum Slew Rate — 11 V/us for LT1037 and LT1037A versions
Betriebstemperatur — [DATA_NEEDED: operating temperature range]
Versorgungsspannung — [DATA_NEEDED: supply voltage range]
RoHS-Status — [DATA_NEEDED: RoHS status]
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: automotive qualification status]

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern