LT1007CH vs LT1007ACP Perbandingan

Perbandingan bersamaan detil LT1007CH dari Analog Devices dan LT1007ACP dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

Analog Devices
LT1007CH LT1007CH - Low-Noise Precision Op Amp | Analog Devices

LT1007CH - Low-Noise Precision Op Amp | Analog Devices

LT1007CH ✓ Aktif

Perbandingan Spesifikasi

Parameter Umum LT1007CH LT1007ACP
Merek Analog Devices Texas Instruments
Kategori Amplifier ICs Amplifier ICs
Status Lingkungan Hidup Aktif Unknown
Amplifier Type Single low-noise, high-speed precision operational amplifier —
Circuit Count 1 circuit —
Wideband Input Noise 2.5 nV/√Hz —
Guaranteed Noise at 10 Hz 4.5 nV/√Hz —
Guaranteed Noise at 1 kHz 3.8 nV/√Hz —
Low-Frequency Peak-to-Peak Noise 60 nV peak-to-peak from 0.1 Hz to 10 Hz —
1/f Corner Frequency 2 Hz —
Input Offset Voltage 10 µV —
Input Offset Voltage Drift 0.2 µV/°C —
Common-Mode Rejection 130 dB 130 dB
Power-Supply Rejection 130 dB 130 dB
Paket TO-5 8-pin PDIP
Tipe Mounting Through-hole Through-hole
Rentang Suhu Kerja [DATA_NEEDED: operating temperature range] —
Supply Voltage Range [DATA_NEEDED: supply voltage range] —
Gain-Bandwidth Product [DATA_NEEDED: LT1007 gain-bandwidth product] 60 MHz on the decompensated LT1037
Input Bias Current [DATA_NEEDED: input bias current] —
RoHS Compliance [DATA_NEEDED: RoHS compliance status] —
REACH Compliance [DATA_NEEDED: REACH compliance status] —
Product Type — Low-noise, high-speed, precision operational amplifier
Number of Amplifiers — 1 amplifier
Maximum Equivalent Input Noise Voltage — 3.8 nV/sqrt(Hz) at 1 kHz
Equivalent Input Noise Voltage — 4.5 nV/sqrt(Hz) at 10 Hz
Low Peak-to-Peak Equivalent Input Noise Voltage — 60 nV typical from 10 Hz
Typical Input Offset Voltage — 10 uV
Input Voltage Drift — 0.2 uV/degree C
Typical Differential Voltage Gain — 20 V/uV at 25 degrees C with a 2 kOhm load to plus or minus 12 V
Minimum Slew Rate — 11 V/us for LT1037 and LT1037A versions
Suhu Kerja — [DATA_NEEDED: operating temperature range]
Tegangan Pemuat — [DATA_NEEDED: supply voltage range]
Status RoHS — [DATA_NEEDED: RoHS status]
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: automotive qualification status]

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon