MAX1480CCPI+ vs MAX1480BEPI+ Vergleich
Detaillierter Direktvergleich von MAX1480CCPI+ von Maxim Integrated und MAX1480BEPI+ von Maxim Integrated. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MAX1480CCPI+ | MAX1480BEPI+ |
|---|---|---|
| Marke | Maxim Integrated | Maxim Integrated |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Isolated RS-485/RS-422 transceiver | Complete electrically isolated RS-485/RS-422 data interface |
| Driver and Receiver Configuration | 1 driver and 1 receiver | — |
| Duplex Mode | Half duplex | Half-duplex |
| Maximum Data Rate | 250 kbps | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Isolation | Galvanically isolated logic-side and bus-side interfaces | Electrically isolated |
| Driver Slew Rate | Reduced slew rate | Reduced-slew-rate driver |
| Supported Standards | RS-485 and RS-422 | — |
| Gehäuse | 28-pin DIP, 0.600 in (15.24 mm) width | 28-pin PDIP |
| Montageart | Through-hole | Through-hole |
| Logic-Side Supply | Single 5 V supply powers both sides of the interface | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | — |
| Isolation Voltage | [DATA_NEEDED: isolation withstand voltage] | [DATA_NEEDED: isolation voltage rating] |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Ruhestrom | [DATA_NEEDED: quiescent current] | — |
| RoHS-Status | unknown | — |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | not_applicable | — |
| Transceiver Configuration | — | 1 driver / 1 receiver |
| Supported Protocols | — | RS-422 and RS-485 |
| Datenrate | — | 250 kb/s |
| Receiver Hysteresis | — | 70 mV |
| Supply Architecture | — | Single +5 V supply on logic side powers both sides |
| Gehäuse / Bauform | — | 28-DIP (0.600 inch, 15.24 mm) |
| Betriebstemperatur | — | 0 °C to +70 °C |
| Application Category | — | EMI-sensitive isolated data interfaces |
| RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Common-Mode Voltage | — | [DATA_NEEDED: common-mode voltage rating] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Input Impedance | — | [DATA_NEEDED: receiver input impedance] |