MAX1480CCPI+ vs MAX1480BEPI+ Comparaison
Comparaison détaillée côte à côte de MAX1480CCPI+ par Maxim Integrated et MAX1480BEPI+ par Maxim Integrated. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | MAX1480CCPI+ | MAX1480BEPI+ |
|---|---|---|
| Marque | Maxim Integrated | Maxim Integrated |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Isolated RS-485/RS-422 transceiver | Complete electrically isolated RS-485/RS-422 data interface |
| Driver and Receiver Configuration | 1 driver and 1 receiver | — |
| Duplex Mode | Half duplex | Half-duplex |
| Maximum Data Rate | 250 kbps | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Isolation | Galvanically isolated logic-side and bus-side interfaces | Electrically isolated |
| Driver Slew Rate | Reduced slew rate | Reduced-slew-rate driver |
| Supported Standards | RS-485 and RS-422 | — |
| Boîtier | 28-pin DIP, 0.600 in (15.24 mm) width | 28-pin PDIP |
| Type de montage | Through-hole | Through-hole |
| Logic-Side Supply | Single 5 V supply powers both sides of the interface | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Isolation Voltage | [DATA_NEEDED: isolation withstand voltage] | [DATA_NEEDED: isolation voltage rating] |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Courant de repos | [DATA_NEEDED: quiescent current] | — |
| Statut RoHS | unknown | — |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | not_applicable | — |
| Transceiver Configuration | — | 1 driver / 1 receiver |
| Supported Protocols | — | RS-422 and RS-485 |
| Débit de données | — | 250 kb/s |
| Receiver Hysteresis | — | 70 mV |
| Supply Architecture | — | Single +5 V supply on logic side powers both sides |
| Boîtier / Format | — | 28-DIP (0.600 inch, 15.24 mm) |
| Température de fonctionnement | — | 0 °C to +70 °C |
| Application Category | — | EMI-sensitive isolated data interfaces |
| RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Common-Mode Voltage | — | [DATA_NEEDED: common-mode voltage rating] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Input Impedance | — | [DATA_NEEDED: receiver input impedance] |