MAX1480CEPI+ vs MAX1480BCPI+ Vergleich
Detaillierter Direktvergleich von MAX1480CEPI+ von Analog Devices und MAX1480BCPI+ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
MAX1480CEPI+ - Isolated RS-485/RS-422 Transceiver, 28-PDIP | Analog Devices
MAX1480CEPI+ ✓ AktivAnalog Devices
MAX1480BCPI+ - Isolated RS-485/RS-422 Transceiver, 28-PDIP | Analog Devices
MAX1480BCPI+ ✓ AktivSpezifikationsvergleich
| Parameter | MAX1480CEPI+ | MAX1480BCPI+ |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | 1/1 Transceiver Half (isolated RS-485/RS-422 interface) | — |
| Supported Standards | RS-485, RS-422 | — |
| Isolation | Electrically isolated (hybrid microcircuit with isolation barrier) | — |
| Supply Architecture | Single +5 V supply on the logic side powers both sides of the interface | — |
| Gehäuse | 28-PDIP (28-pin plastic DIP, through-hole) | 28-PDIP (0.600", 15.24 mm wide) |
| Anzahl der Pins | 28 | — |
| Montageart | Through-hole | Through-Hole |
| Package Code / Shape | DIP, rectangular | — |
| Temperature Grade | Industrial | — |
| Driver Configuration | Half-duplex, 1 driver / 1 receiver | — |
| Driver Slew Rate | Reduced-slew-rate drivers (MAX1480B/C feature) to minimize EMI | — |
| Family Variants | MAX1480A / MAX1480B / MAX1480C share the 28-pin DIP package | — |
| Maximum Data Rate | [DATA_NEEDED: maximum signaling rate for MAX1480C variant] | — |
| Common-Mode Range | [DATA_NEEDED: bus-side common-mode voltage range] | — |
| Isolation Withstand Voltage | [DATA_NEEDED: isolation withstand voltage rating] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: minimum and maximum junction/ambient operating temperature] | — |
| Logic Supply Voltage Range | [DATA_NEEDED: VCC operating range] | — |
| RoHS-Status | unknown | Compliant |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Datenrate | — | 250 kbps |
| Receiver Hysteresis | — | 70 mV |
| Supply Voltage (Logic Side) | — | 5 V (single supply) |
| Isolation Voltage | — | 1000 Vrms (galvanic, transformer-based) |
| Betriebstemperatur | — | -40C to +85C |
| Number of Nodes on Bus | — | Up to 32 transceivers |
| Slew Rate | — | Reduced (low-EMI drivers) |
| Construction | — | Hybrid microcircuit (CMOS + pulse transformer) |
| Lead-Free / Halogen-Free | — | [DATA_NEEDED: lead-free / halogen-free status] |